N12Turbo.com lanyards are now available! Click here to visit the shop
running 10psi with standard cluch
running 10psi with standard cluch
how are you guys will a standard clutch be ok with 10 psi boost cheers any info would be helpfull
how long is a piece of string? it all depends on the condition of the clutch. Boost it up, if it slips buy a new one and or put the boost back down
but in general, the answer is yes
but in general, the answer is yes
Members Ride: http://forum.n12turbo.com/viewtopic.php?t=6786
85 ET, M/tech LT10X, T28, FMIC 2.5" Stainless Piping, 3" Intake, Dump n Zorst, JDM Inlet, CA18DET Injectors, Bosch 040, Bodykit, 17s
85 ET, M/tech LT10X, T28, FMIC 2.5" Stainless Piping, 3" Intake, Dump n Zorst, JDM Inlet, CA18DET Injectors, Bosch 040, Bodykit, 17s
- tassuperkart
- Administrator
- Posts: 5578
- Joined: Wed Jul 05, 2006 8:39 pm
- Location: Southern Tasmania
- Contact:
- dexi_styles
- Posts: 1227
- Joined: Fri Aug 25, 2006 1:49 pm
- Location: South Brisbane
you would be fine with a stock clutch, ive done it before had no problem untill the clutch had worn out (from burn out shenanigans) and started slipping,
Dex
Dex
http://forum.n12turbo.com/viewtopic.php?t=446 Benny's Old Dog....
Bringing New life to the Young Dog...
http://forum.n12turbo.com/viewtopic.php?t=348
![Image](http://i116.photobucket.com/albums/o5/dexi_styles/TURBOETcopy.jpg)
Bringing New life to the Young Dog...
http://forum.n12turbo.com/viewtopic.php?t=348
![Image](http://i116.photobucket.com/albums/o5/dexi_styles/TURBOETcopy.jpg)
Come on, lets face it. If you aren't pushing hard enough to slip a stocko clutch, your just not trying hard enough and should be driving an Excel!
Damo
![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Damo
Do humanity a favor, use your brain and fight the forces of WOO WOO!
http://www.youtube.com/watch?v=G1mrbxhWU5Y
http://www.youtube.com/watch?v=G1mrbxhWU5Y
well saidDamo wrote:Come on, lets face it. If you aren't pushing hard enough to slip a stocko clutch, your just not trying hard enough and should be driving an Excel!![]()
![]()
Damo
![Twisted Evil :twisted:](./images/smilies/icon_twisted.gif)
Members Ride: http://forum.n12turbo.com/viewtopic.php?t=6786
85 ET, M/tech LT10X, T28, FMIC 2.5" Stainless Piping, 3" Intake, Dump n Zorst, JDM Inlet, CA18DET Injectors, Bosch 040, Bodykit, 17s
85 ET, M/tech LT10X, T28, FMIC 2.5" Stainless Piping, 3" Intake, Dump n Zorst, JDM Inlet, CA18DET Injectors, Bosch 040, Bodykit, 17s
- Ash
- Administrator
- Posts: 3246
- Joined: Thu Aug 03, 2006 7:17 am
- Location: Wangaratta, Victoria, Australia
the beads of sweat are starting to form. here comes the worry troll.xr6eta wrote:I'm not liking the sound of this DAMO, as my master mechanic I don't think this is a responsible attitude.Damo wrote:Come on, lets face it. If you aren't pushing hard enough to slip a stocko clutch, your just not trying hard enough and should be driving an Excel!![]()
![]()
Damo
![Very Happy :D](./images/smilies/icon_biggrin.gif)
My mechanics motto was "If you're not living life on the edge, you're taking up too much room".xr6eta wrote:I'm not liking the sound of this DAMO, as my master mechanic I don't think this is a responsible attitude.Damo wrote:Come on, lets face it. If you aren't pushing hard enough to slip a stocko clutch, your just not trying hard enough and should be driving an Excel!![]()
![]()
Damo