N12Turbo.com lanyards are now available! Click here to visit the shop
running 10psi with standard cluch
running 10psi with standard cluch
how are you guys will a standard clutch be ok with 10 psi boost cheers any info would be helpfull
how long is a piece of string? it all depends on the condition of the clutch. Boost it up, if it slips buy a new one and or put the boost back down
but in general, the answer is yes
but in general, the answer is yes
Members Ride: http://forum.n12turbo.com/viewtopic.php?t=6786
85 ET, M/tech LT10X, T28, FMIC 2.5" Stainless Piping, 3" Intake, Dump n Zorst, JDM Inlet, CA18DET Injectors, Bosch 040, Bodykit, 17s
85 ET, M/tech LT10X, T28, FMIC 2.5" Stainless Piping, 3" Intake, Dump n Zorst, JDM Inlet, CA18DET Injectors, Bosch 040, Bodykit, 17s
- tassuperkart
- Administrator
- Posts: 5578
- Joined: Wed Jul 05, 2006 8:39 pm
- Location: Southern Tasmania
- Contact:
- dexi_styles
- Posts: 1227
- Joined: Fri Aug 25, 2006 1:49 pm
- Location: South Brisbane
you would be fine with a stock clutch, ive done it before had no problem untill the clutch had worn out (from burn out shenanigans) and started slipping,
Dex
Dex
http://forum.n12turbo.com/viewtopic.php?t=446 Benny's Old Dog....
Bringing New life to the Young Dog...
http://forum.n12turbo.com/viewtopic.php?t=348
Bringing New life to the Young Dog...
http://forum.n12turbo.com/viewtopic.php?t=348
Come on, lets face it. If you aren't pushing hard enough to slip a stocko clutch, your just not trying hard enough and should be driving an Excel!
Damo
Damo
Do humanity a favor, use your brain and fight the forces of WOO WOO!
http://www.youtube.com/watch?v=G1mrbxhWU5Y
http://www.youtube.com/watch?v=G1mrbxhWU5Y
well saidDamo wrote:Come on, lets face it. If you aren't pushing hard enough to slip a stocko clutch, your just not trying hard enough and should be driving an Excel!
Damo
Members Ride: http://forum.n12turbo.com/viewtopic.php?t=6786
85 ET, M/tech LT10X, T28, FMIC 2.5" Stainless Piping, 3" Intake, Dump n Zorst, JDM Inlet, CA18DET Injectors, Bosch 040, Bodykit, 17s
85 ET, M/tech LT10X, T28, FMIC 2.5" Stainless Piping, 3" Intake, Dump n Zorst, JDM Inlet, CA18DET Injectors, Bosch 040, Bodykit, 17s
- Ash
- Administrator
- Posts: 3246
- Joined: Thu Aug 03, 2006 7:17 am
- Location: Wangaratta, Victoria, Australia
the beads of sweat are starting to form. here comes the worry troll.xr6eta wrote:I'm not liking the sound of this DAMO, as my master mechanic I don't think this is a responsible attitude.Damo wrote:Come on, lets face it. If you aren't pushing hard enough to slip a stocko clutch, your just not trying hard enough and should be driving an Excel!
Damo
My mechanics motto was "If you're not living life on the edge, you're taking up too much room".xr6eta wrote:I'm not liking the sound of this DAMO, as my master mechanic I don't think this is a responsible attitude.Damo wrote:Come on, lets face it. If you aren't pushing hard enough to slip a stocko clutch, your just not trying hard enough and should be driving an Excel!
Damo