N12Turbo.com lanyards are now available! Click here to visit the shop
ET wont start and no spark from from coil
ET wont start and no spark from from coil
hey as mentioned i have tried all the usual stuff like tryn to get a spark from the coil lead on some steel but nothing , it tries to turn over but it just wont any ideas other than the obvious ,(DEAD coil, capacitor , transistor)
thanx from Dan
thanx from Dan
Drrat, Drrat and Double Drrrat !! dont just sit there mutley do something!!!
Hey having same issues!!
Just re-wired my ET with the LT10 already installed and now it won't turn over. It sparks from coil one on ignition. But not when cranking!! I have 12v running to the 1st coil from the ecu.
Good crank but no spark! Is it the dizzy/CAS???
Sparks ok during self test. Bloody frustrating!!!
Just re-wired my ET with the LT10 already installed and now it won't turn over. It sparks from coil one on ignition. But not when cranking!! I have 12v running to the 1st coil from the ecu.
Good crank but no spark! Is it the dizzy/CAS???
Sparks ok during self test. Bloody frustrating!!!
- tassuperkart
- Administrator
- Posts: 5578
- Joined: Wed Jul 05, 2006 8:39 pm
- Location: Southern Tasmania
- Contact:
- dexi_styles
- Posts: 1227
- Joined: Fri Aug 25, 2006 1:49 pm
- Location: South Brisbane
If i remember correctly we swapped the transistor. that was iit wasnt it Dan??
http://forum.n12turbo.com/viewtopic.php?t=446 Benny's Old Dog....
Bringing New life to the Young Dog...
http://forum.n12turbo.com/viewtopic.php?t=348
Bringing New life to the Young Dog...
http://forum.n12turbo.com/viewtopic.php?t=348
-
- Posts: 155
- Joined: Sun Apr 26, 2009 3:49 pm
- Location: Brisbane
Re
Has the transistor got power and earth? use the wiring diagrams and a multimeter to work it out.
Are the injectors firing? If u don't know, then use the multimeter to check them too.
If neither injectors or coil are firing then look at power supplies and the computer. Once again with the wiring diagrams.
Darren
Are the injectors firing? If u don't know, then use the multimeter to check them too.
If neither injectors or coil are firing then look at power supplies and the computer. Once again with the wiring diagrams.
Darren
Race it.
the car runs fine now, it was the leads(in the blue one) , they were in the wrong firing order lol... the guy i bought the car from didnt connect them to the right plug thus resulting in incorrect firing order... and yes Dexi we did change it and it worked , ..although now my silver et it wont start soome times , i think the solenoid is fucked, cause every now and then it just wont start so i arc it out with a screw driver and BAM!! it goes... f*%kn ET'S
Drrat, Drrat and Double Drrrat !! dont just sit there mutley do something!!!
- tassuperkart
- Administrator
- Posts: 5578
- Joined: Wed Jul 05, 2006 8:39 pm
- Location: Southern Tasmania
- Contact: