hey as mentioned i have tried all the usual stuff like tryn to get a spark from the coil lead on some steel but nothing , it tries to turn over but it just wont any ideas other than the obvious ,(DEAD coil, capacitor , transistor)
thanx from Dan
Drrat, Drrat and Double Drrrat !! dont just sit there mutley do something!!!
Hey having same issues!!
Just re-wired my ET with the LT10 already installed and now it won't turn over. It sparks from coil one on ignition. But not when cranking!! I have 12v running to the 1st coil from the ecu.
Where does the tacho wire link up to? Having been reading that possibly the dizzy? or just on the accessories harness? Now I know why my tacho hasn't been working.
ok so i changed coil, and still get nothing , i know that the other coil i put in works cause its off the other ET i have that is going ....what the hell could it be
Drrat, Drrat and Double Drrrat !! dont just sit there mutley do something!!!
the car runs fine now, it was the leads(in the blue one) , they were in the wrong firing order lol... the guy i bought the car from didnt connect them to the right plug thus resulting in incorrect firing order... and yes Dexi we did change it and it worked , ..although now my silver et it wont start soome times , i think the solenoid is fucked, cause every now and then it just wont start so i arc it out with a screw driver and BAM!! it goes... f*%kn ET'S
Drrat, Drrat and Double Drrrat !! dont just sit there mutley do something!!!