General chat related to anything N12.
Kaine_ET
Posts: 18 Joined: Sun Aug 05, 2012 1:37 am
Location: Melbourne, AUS
Post
by Kaine_ET » Sat Aug 25, 2012 1:10 pm
hey guys, duno if this has been covered. but im looking for a set of stockies but like 15-16 inch and wondering if anyone knows what type of car I could posibly get them off? I want a set with low profile tyres. any help.is helpful! cheers peeps!
Kaine_ET
Callumgw
Posts: 2354 Joined: Fri Aug 11, 2006 12:55 pm
Location: Melbourne, Australia
Post
by Callumgw » Sun Aug 26, 2012 8:57 am
you might have luck if you can find some steel wheels on the last pulsar (before it became Tiida). I think they had the right stud spacing. Unfortunately the rest from n13 on was wrong.
C
Callumgw
Kaine_ET
Posts: 18 Joined: Sun Aug 05, 2012 1:37 am
Location: Melbourne, AUS
Post
by Kaine_ET » Sun Aug 26, 2012 11:03 am
thanks bud, il try them in a few days! time for a trip to the wreckers and try many types of wheels!
Kaine_ET
SimoN10
Posts: 54 Joined: Fri Nov 16, 2007 4:05 pm
Post
by SimoN10 » Sun Aug 26, 2012 1:21 pm
I think the early model skyline (R31) have the same stud pattern. Might be worth a look. Good luck.
SimoN10
Kaine_ET
Posts: 18 Joined: Sun Aug 05, 2012 1:37 am
Location: Melbourne, AUS
Post
by Kaine_ET » Sun Aug 26, 2012 9:13 pm
cheers mate, I thought they were 5 stud. il have a look!
Kaine_ET
15exa
Administrator
Posts: 1015 Joined: Mon Aug 07, 2006 11:00 am
Location: brisbane
Post
by 15exa » Sun Aug 26, 2012 9:13 pm
i believe all pulsar, n13 to n16 came with 4x110. 2006 onward tiida came with 114.3.
early hyundai elantra and evo 3 shape lancer also had 4x114.3 15" steelies
15exa
Kaine_ET
Posts: 18 Joined: Sun Aug 05, 2012 1:37 am
Location: Melbourne, AUS
Post
by Kaine_ET » Mon Aug 27, 2012 12:58 am
cheers mate, whats the n12 one the then? I dont know too much avout wheels etc. haha. I just know how yo change them!
Kaine_ET
n12et_exa
Posts: 109 Joined: Sat Dec 17, 2011 1:45 pm
Post
by n12et_exa » Mon Aug 27, 2012 8:19 am
n12 are 114.3 r31 ti skylines run 15 inch stockies as a spare so wreckers should be able to help you out
n12et_exa
Kaine_ET
Posts: 18 Joined: Sun Aug 05, 2012 1:37 am
Location: Melbourne, AUS
Post
by Kaine_ET » Mon Aug 27, 2012 6:26 pm
cheers mate, I went down there today and what do yoy know! perfect fit! thanks guys for all the help!
Kaine_ET
shanec86
Administrator
Posts: 1454 Joined: Mon Jul 03, 2006 8:00 pm
Location: Melbourne
Contact:
Post
by shanec86 » Mon Aug 27, 2012 8:11 pm
Heres just a few nissan ones
14" 4x114.3
-N12 ET alloys
-R31 Pintara / Skyline steelies
-910 Bluebird steelies
15" 4x114.3
-910 Bluebird TRX
-R31 skyline alloys (silhouette / TI)
-R31 Skyline spare wheel - steelies
-S13 Silvia (SR + CA)
shanec86
Kaine_ET
Posts: 18 Joined: Sun Aug 05, 2012 1:37 am
Location: Melbourne, AUS
Post
by Kaine_ET » Mon Aug 27, 2012 11:02 pm
cheers! big help. ive also been looking around for other wheels just for future use, what offset is best?im.looking at wheels with +42 but just recently discovered how annoying buyingbthe wrong wheels are (just got some 20's for my commodore wagon and they hit the strut! -.-" )
Kaine_ET