hey,
if anyone is doing a battery relocation to boot in the near future,
do ya think you could do an article on it, havent been able to find much on it
Battey Relocation
-
- Posts: 49
- Joined: Fri Sep 08, 2006 11:29 pm
- Location: Streaky Bay, SA
Get a battery box, cable and a fuse... put the battery in the back. run the cable
162.4kw - 588.8nm
http://www.cmsperformance.net/
http://www.cmsperformance.net/
nice work shane, spot on, and so detailed, love all those pics you have included! lol, think this one is a job for justin, sure he has a million pics of it haha. Very good thing to do, tidies up the engine bay so much
you will need a battery box for legal purposes and i think u need to vent it to outside the car, but i wouldnt do that till i got told to by the police lol, but battery box is a good idea! also makes putting sound system in a whole lot easier!
you will need a battery box for legal purposes and i think u need to vent it to outside the car, but i wouldnt do that till i got told to by the police lol, but battery box is a good idea! also makes putting sound system in a whole lot easier!
Members Ride: http://forum.n12turbo.com/viewtopic.php?t=6786
85 ET, M/tech LT10X, T28, FMIC 2.5" Stainless Piping, 3" Intake, Dump n Zorst, JDM Inlet, CA18DET Injectors, Bosch 040, Bodykit, 17s
85 ET, M/tech LT10X, T28, FMIC 2.5" Stainless Piping, 3" Intake, Dump n Zorst, JDM Inlet, CA18DET Injectors, Bosch 040, Bodykit, 17s
you can use a dry cel like odyssey batteries and then you dont have to vent it.etking wrote:nice work shane, spot on, and so detailed, love all those pics you have included! lol, think this one is a job for justin, sure he has a million pics of it haha. Very good thing to do, tidies up the engine bay so much
you will need a battery box for legal purposes and i think u need to vent it to outside the car, but i wouldnt do that till i got told to by the police lol, but battery box is a good idea! also makes putting sound system in a whole lot easier!
but yes, run the cable from the battery (in the boot) to the started motor, and then ground the battery in the boot in a well grounded place, and make sure you reground the engine if you moved the cable, then fuse it at the battery.
its that easy.
good luck
Mods: GT28R, Microtech lt10s, stg3 cam, double valve springs, vn intake to vl external pump, mapassi @ 50psi, 3inch dump to 2 1/2 system, vl throttle, NPC clutch, 160HP @ wheels on 12psi
"power to the peaceful" Michael Frantii
"power to the peaceful" Michael Frantii
-
- Posts: 49
- Joined: Fri Sep 08, 2006 11:29 pm
- Location: Streaky Bay, SA