N12Turbo.com lanyards are now available! Click here to visit the shop
Hub question...
Hub question...
Ok, Iv done a search for a few hours and come up with nothing really
Im interested to know.... If anyone has fitted or knows if N14 SSS hub assemblies will bolt to N12 Arms and struts....
possibly with minor modification?
Im looking into pulling off an SR20 conversion... and If I can use unmodified N14 axles (hence the hub fitting)
I know its a shitload of work, but Iv got time and knowledge...and no licence for 12 months..
Im aware that custom mounting will be required and overall this is a huge job
but Im building a purpose no bullshit bullet...
Im interested to know.... If anyone has fitted or knows if N14 SSS hub assemblies will bolt to N12 Arms and struts....
possibly with minor modification?
Im looking into pulling off an SR20 conversion... and If I can use unmodified N14 axles (hence the hub fitting)
I know its a shitload of work, but Iv got time and knowledge...and no licence for 12 months..
Im aware that custom mounting will be required and overall this is a huge job
but Im building a purpose no bullshit bullet...
T3T4 hybrid, FMIC and MT8 =
EA-73-XA now known as DR-34-MN
EA-73-XA now known as DR-34-MN
I had been wondering something similar. A friend of mine was wrecking a N14 Pulsar (only the 1.6 nothing special) but I'd wondered if I could use the brakes from it because I figured they would be a bit better than ET brakes (since the N14 weighed more)
But it looks like the differences are not even worth looking at.
But it looks like the differences are not even worth looking at.
-
- Posts: 5
- Joined: Fri Jul 03, 2009 10:01 am
- Location: Cranbourne
Hey mate n14 hubs will not fit. I have sr20 in my
Et had to make custom hubs, engine mounts
And axles. I will sell the hubs with gtir brakes and
Discs for 750 cost over 1200 to make originally hope this
Helps. If any one wants pics can send them via
Email been wanting to do a members ride section
But to hard to post pics on this site
Et had to make custom hubs, engine mounts
And axles. I will sell the hubs with gtir brakes and
Discs for 750 cost over 1200 to make originally hope this
Helps. If any one wants pics can send them via
Email been wanting to do a members ride section
But to hard to post pics on this site
- tassuperkart
- Administrator
- Posts: 5578
- Joined: Wed Jul 05, 2006 8:39 pm
- Location: Southern Tasmania
- Contact:
- tassuperkart
- Administrator
- Posts: 5578
- Joined: Wed Jul 05, 2006 8:39 pm
- Location: Southern Tasmania
- Contact:
- tassuperkart
- Administrator
- Posts: 5578
- Joined: Wed Jul 05, 2006 8:39 pm
- Location: Southern Tasmania
- Contact:
Yep
Get a pair of n12 and n14 shafts, cut and shut!
Get someone who knows what they are doing with this kind of thing to weld them or they will go bang.
You will be told many times this cannot be done but dont give up. Its surprisingly hard to find people with enough nouse who do this kind of mod. Speak to a racecar fabricator.
Oracle
Get a pair of n12 and n14 shafts, cut and shut!
Get someone who knows what they are doing with this kind of thing to weld them or they will go bang.
You will be told many times this cannot be done but dont give up. Its surprisingly hard to find people with enough nouse who do this kind of mod. Speak to a racecar fabricator.
Oracle
Forcd4 wrote:Oh fuk no dude it's you a again, the oracle.