N12Turbo.com lanyards are now available! Click here to visit the shop
kanes n12 exa update 15/1/2017
u could paint hem same as rest of rim maybe?
Low Slow and Sarcastic
Always Oscar Mike on the AO
www.twitter.com/garagepanda for my latest Inane comments
www.TasSportImages.com
Always Oscar Mike on the AO
www.twitter.com/garagepanda for my latest Inane comments
www.TasSportImages.com
agree with panda on what to do with the centres but the rims really suit the car and make it look very tuff
Members Ride: http://forum.n12turbo.com/viewtopic.php?t=6786
85 ET, M/tech LT10X, T28, FMIC 2.5" Stainless Piping, 3" Intake, Dump n Zorst, JDM Inlet, CA18DET Injectors, Bosch 040, Bodykit, 17s
85 ET, M/tech LT10X, T28, FMIC 2.5" Stainless Piping, 3" Intake, Dump n Zorst, JDM Inlet, CA18DET Injectors, Bosch 040, Bodykit, 17s
-
- Posts: 1066
- Joined: Thu Feb 15, 2007 7:39 pm
- Location: trying to avoid pulsar owners
- Contact:
- Paul Smith
- Posts: 575
- Joined: Thu Aug 03, 2006 4:55 pm
- Location: Brisbane
- The Renegade
- Administrator
- Posts: 3002
- Joined: Tue Jul 04, 2006 7:22 pm
- Location: Telegraph Point - N.S.W. Mid North Coast
They look freakin hot man.
--------------------
Trust no-one but yourself.
The beast:
http://forum.n12turbo.com/viewtopic.php?t=3982
=====================
Mid North Coast Member.
=====================
Trust no-one but yourself.
The beast:
http://forum.n12turbo.com/viewtopic.php?t=3982
=====================
Mid North Coast Member.
=====================
- digginganddirt
- Posts: 416
- Joined: Sun May 13, 2007 10:35 am
- Location: bendigo victoria
bit of an up date
got an exedy "sports tuff" heavy duty clutch that i will be wacking in before powercruise
almost finished my interior.... will post up some pics soon
went to the shop where my head is being built to check on the progress and to drop off an intake manifold to be port matched, its looking awesome. valves are done, have been custom made from billet blanks, they are massive. i am going down again tomorow so i will take some pics.
gonna be sending my cam off to surecams to get the regrind done in the next week or two
although she has been giving me the shits lately, mon, tues and today i have had to push her outta traffic...... driving along then she just stalls. thiught it was the coil, replaced it on monday then same thing happened tuesday. put the old coil back in and she went aiight till today, same thing again.......... we have put it down to the ignition module, so i gotta look at that over the week end
got an exedy "sports tuff" heavy duty clutch that i will be wacking in before powercruise
almost finished my interior.... will post up some pics soon
went to the shop where my head is being built to check on the progress and to drop off an intake manifold to be port matched, its looking awesome. valves are done, have been custom made from billet blanks, they are massive. i am going down again tomorow so i will take some pics.
gonna be sending my cam off to surecams to get the regrind done in the next week or two
although she has been giving me the shits lately, mon, tues and today i have had to push her outta traffic...... driving along then she just stalls. thiught it was the coil, replaced it on monday then same thing happened tuesday. put the old coil back in and she went aiight till today, same thing again.......... we have put it down to the ignition module, so i gotta look at that over the week end
think i sorted my mechanical issues
had a few ppl say it could be the cas so i located and fitted another dizzy, took it for a drive tonight to see how it would go and it didnt stall
so far so good...... see what happens on the way to work tomorrow tho
didnt get to mess around with the interior on the wk end, will hopefully finish it through the week
clutch wasnt done on friday wen was spose to be done either, try n get that done on wednesday.......
any ways i will keep yous posted with pics wen i finish interior
had a few ppl say it could be the cas so i located and fitted another dizzy, took it for a drive tonight to see how it would go and it didnt stall
so far so good...... see what happens on the way to work tomorrow tho
didnt get to mess around with the interior on the wk end, will hopefully finish it through the week
clutch wasnt done on friday wen was spose to be done either, try n get that done on wednesday.......
any ways i will keep yous posted with pics wen i finish interior
- The Renegade
- Administrator
- Posts: 3002
- Joined: Tue Jul 04, 2006 7:22 pm
- Location: Telegraph Point - N.S.W. Mid North Coast
Does sound so very much like the CAS. Fingers crossed man.
--------------------
Trust no-one but yourself.
The beast:
http://forum.n12turbo.com/viewtopic.php?t=3982
=====================
Mid North Coast Member.
=====================
Trust no-one but yourself.
The beast:
http://forum.n12turbo.com/viewtopic.php?t=3982
=====================
Mid North Coast Member.
=====================
ok, got my clutch in today and thoght i would put up some pics pf the progress of the interior
rear is almost finished, just have to make up the floor...... i rekon it came up aiight fo my first attempt at upholstry, almost looks factory, all sits nice and flush.
the amps all wired up, im in the process of making up a facia to cover the messy wiring so just the amps are xpo53'd, can also see the false floor i made up.
this is the facia cut out. tried to make it neat as possible, cut outs for the boot hinges etc. made up brackets to secure it in place with door trim clips.
the brackets
couple of the brackets in place
rear is almost finished, just have to make up the floor...... i rekon it came up aiight fo my first attempt at upholstry, almost looks factory, all sits nice and flush.
the amps all wired up, im in the process of making up a facia to cover the messy wiring so just the amps are xpo53'd, can also see the false floor i made up.
this is the facia cut out. tried to make it neat as possible, cut outs for the boot hinges etc. made up brackets to secure it in place with door trim clips.
the brackets
couple of the brackets in place