N12Turbo.com lanyards are now available! Click here to visit the shop
joes ET ......NOW FOR SALE URGENT SALE NEEDS TO GO IN 2 WEEK
darn that is straight ... put the battery in the boot and put the pod behind the headlight for some nice cold air flow
Members Ride: http://forum.n12turbo.com/viewtopic.php?t=6786
85 ET, M/tech LT10X, T28, FMIC 2.5" Stainless Piping, 3" Intake, Dump n Zorst, JDM Inlet, CA18DET Injectors, Bosch 040, Bodykit, 17s
85 ET, M/tech LT10X, T28, FMIC 2.5" Stainless Piping, 3" Intake, Dump n Zorst, JDM Inlet, CA18DET Injectors, Bosch 040, Bodykit, 17s
FREE
well it was a swap for my dead exa hehe thanks a mil MICK have fun restoring it and post a pict of the engine when u pull it out, so us the damage nobody has ever seen the likes of before muahahahaha
yeah ill be taking care of this one just gotta iron a few small bugs out and its perfect
not really a big fan of battery in the boot as my boot i wanna keep fairly free this tiume hehe ill make a smallish sub box, nothing great as i want the boot back hehe and i got freeair subs to go in so size dosent really matter too much
then in go the splits and headunit and 6x9 in the parcel tray when i get one from someone in my WTB thread, then a good cut n polish and itll be the best et in brissy muahahahahhahaaaaa
oh and a quick redo of the half assed attempt of redoing the door trims hehe as i professionally did the trims and seats in my exa at work i know how it all goes now hehe so its all sweet
well it was a swap for my dead exa hehe thanks a mil MICK have fun restoring it and post a pict of the engine when u pull it out, so us the damage nobody has ever seen the likes of before muahahahaha
yeah ill be taking care of this one just gotta iron a few small bugs out and its perfect
not really a big fan of battery in the boot as my boot i wanna keep fairly free this tiume hehe ill make a smallish sub box, nothing great as i want the boot back hehe and i got freeair subs to go in so size dosent really matter too much
then in go the splits and headunit and 6x9 in the parcel tray when i get one from someone in my WTB thread, then a good cut n polish and itll be the best et in brissy muahahahahhahaaaaa
oh and a quick redo of the half assed attempt of redoing the door trims hehe as i professionally did the trims and seats in my exa at work i know how it all goes now hehe so its all sweet
LANYARDS FOR SALE AGAINLIMITED NUMBERS BE QUICK MUST SELL for infoVISIT:
http://forum.n12turbo.com/viewtopic.php?t=4652
http://forum.n12turbo.com/viewtopic.php?t=4652
- digginganddirt
- Posts: 416
- Joined: Sun May 13, 2007 10:35 am
- Location: bendigo victoria
I AM NOT A SPY (said in ricky dicky voice)
see i even had my username changed from EXA4EVA to ET 4 EVA hahahahaha
see i even had my username changed from EXA4EVA to ET 4 EVA hahahahaha
LANYARDS FOR SALE AGAINLIMITED NUMBERS BE QUICK MUST SELL for infoVISIT:
http://forum.n12turbo.com/viewtopic.php?t=4652
http://forum.n12turbo.com/viewtopic.php?t=4652
mods done this weekend:
installed TAIT 2020 uhf radio and laid wires for splits and amps and subs in the doors trims just got to get the mp3 player and speakers to go in heeh and build soem sort of custm sub box to fit in the boot and not waste space
installed TAIT 2020 uhf radio and laid wires for splits and amps and subs in the doors trims just got to get the mp3 player and speakers to go in heeh and build soem sort of custm sub box to fit in the boot and not waste space
LANYARDS FOR SALE AGAINLIMITED NUMBERS BE QUICK MUST SELL for infoVISIT:
http://forum.n12turbo.com/viewtopic.php?t=4652
http://forum.n12turbo.com/viewtopic.php?t=4652
- The Renegade
- Administrator
- Posts: 3002
- Joined: Tue Jul 04, 2006 7:22 pm
- Location: Telegraph Point - N.S.W. Mid North Coast
Do you have the programming software and cable for that 2020?
If not, I might be able to help you out. (me being an ex-radio tech and all! )
If not, I might be able to help you out. (me being an ex-radio tech and all! )
--------------------
Trust no-one but yourself.
The beast:
http://forum.n12turbo.com/viewtopic.php?t=3982
=====================
Mid North Coast Member.
=====================
Trust no-one but yourself.
The beast:
http://forum.n12turbo.com/viewtopic.php?t=3982
=====================
Mid North Coast Member.
=====================
yeah already programmed the 2020, but its a 2040 convereted to 2020 so its missing the cellcall board
LANYARDS FOR SALE AGAINLIMITED NUMBERS BE QUICK MUST SELL for infoVISIT:
http://forum.n12turbo.com/viewtopic.php?t=4652
http://forum.n12turbo.com/viewtopic.php?t=4652
hehe nothing just high tech comms equipment
LANYARDS FOR SALE AGAINLIMITED NUMBERS BE QUICK MUST SELL for infoVISIT:
http://forum.n12turbo.com/viewtopic.php?t=4652
http://forum.n12turbo.com/viewtopic.php?t=4652
- The Renegade
- Administrator
- Posts: 3002
- Joined: Tue Jul 04, 2006 7:22 pm
- Location: Telegraph Point - N.S.W. Mid North Coast
I'll see if I can round you up a selcal board.
Does it have a Series II head? (green LED's next to the buttons instead of orange)
Does it have a Series II head? (green LED's next to the buttons instead of orange)
--------------------
Trust no-one but yourself.
The beast:
http://forum.n12turbo.com/viewtopic.php?t=3982
=====================
Mid North Coast Member.
=====================
Trust no-one but yourself.
The beast:
http://forum.n12turbo.com/viewtopic.php?t=3982
=====================
Mid North Coast Member.
=====================
yeah i did a S2 remote head upgrade on it, just need mounting bracket and s2 mic hehe
LANYARDS FOR SALE AGAINLIMITED NUMBERS BE QUICK MUST SELL for infoVISIT:
http://forum.n12turbo.com/viewtopic.php?t=4652
http://forum.n12turbo.com/viewtopic.php?t=4652
- The Renegade
- Administrator
- Posts: 3002
- Joined: Tue Jul 04, 2006 7:22 pm
- Location: Telegraph Point - N.S.W. Mid North Coast
I'll get back to you.
--------------------
Trust no-one but yourself.
The beast:
http://forum.n12turbo.com/viewtopic.php?t=3982
=====================
Mid North Coast Member.
=====================
Trust no-one but yourself.
The beast:
http://forum.n12turbo.com/viewtopic.php?t=3982
=====================
Mid North Coast Member.
=====================