Moderator: shanec86
shanec86
Administrator
Posts: 1454 Joined: Mon Jul 03, 2006 8:00 pm
Location: Melbourne
Contact:
Post
by shanec86 » Tue Mar 06, 2007 12:20 am
[center]
CMS Performance
N12 Pulsar Front Brake Rotors
Slotted and Cross Drilled
[/center]
[center]
[/center]
These rotors will suit:
-Nissan Pulsar N12 83-87
-Nissan Pulsar N12 ET 84-87
-Nissan Pulsar EXA (non-vented type) 83-85
-Nissan Sunny/Sentra B11 82-85
-Nissan Cherry/Langley 82-86
Specifications:
-Diameter - 240mm
-Height - 35.5mm
-Thickness - 12mm
-Center hole - 76mm
1x Pair Front Rotors
***************************************
BACK IN STOCK!
AUD$170 a pair +Delivery
Will ship worldwide!
***************************************
Contact: shane @ cmsperformance.com.au
Last edited by
shanec86 on Wed May 08, 2013 8:41 pm, edited 10 times in total.
shanec86
The Renegade
Administrator
Posts: 3002 Joined: Tue Jul 04, 2006 7:22 pm
Location: Telegraph Point - N.S.W. Mid North Coast
Post
by The Renegade » Tue Mar 06, 2007 8:08 pm
Are the pulsar and exa disks different sizes???
The Renegade
shanec86
Administrator
Posts: 1454 Joined: Mon Jul 03, 2006 8:00 pm
Location: Melbourne
Contact:
Post
by shanec86 » Tue Mar 06, 2007 8:31 pm
The Prarie and some models of the exa had the smaller diamter, although thicker and vented rotors.
shanec86
Rohan 84ET
Posts: 1429 Joined: Thu Feb 08, 2007 9:51 pm
Location: Adelaide, South Australia
Post
by Rohan 84ET » Mon May 21, 2007 8:24 pm
so these rotars would be more efficient than the prairie vented rotors for my ET, just wondering what size calipers would fit onto these . . . .any model of car i need to take em off?
Rohan 84ET
Rohan 84ET
Posts: 1429 Joined: Thu Feb 08, 2007 9:51 pm
Location: Adelaide, South Australia
Post
by Rohan 84ET » Mon May 21, 2007 8:27 pm
i was thinkin about doing the prarie upgrade . .but would rather go with a quality performance product.
Rohan 84ET
shanec86
Administrator
Posts: 1454 Joined: Mon Jul 03, 2006 8:00 pm
Location: Melbourne
Contact:
Post
by shanec86 » Tue May 22, 2007 12:12 am
you use the standard pulsar caliper, but if you want to get custom mounting brackets you can use any caliper you want
shanec86
Rohan 84ET
Posts: 1429 Joined: Thu Feb 08, 2007 9:51 pm
Location: Adelaide, South Australia
Post
by Rohan 84ET » Tue May 22, 2007 12:32 am
arnt the prairie brakes a lil bit larger? and the calipers are larger too?
how do these CMS rotors + ET calipers rate?
sorry for the questions . . i am just gonna be getting either one or the other very soon.
cheers m8.
Rohan 84ET
shanec86
Administrator
Posts: 1454 Joined: Mon Jul 03, 2006 8:00 pm
Location: Melbourne
Contact:
Post
by shanec86 » Tue May 22, 2007 12:44 am
prairie rotors are smaller
ive never had a problem with the rotors on track days, compared to the standard ones which faded rather quick
shanec86
Rohan 84ET
Posts: 1429 Joined: Thu Feb 08, 2007 9:51 pm
Location: Adelaide, South Australia
Post
by Rohan 84ET » Tue May 22, 2007 1:08 am
ah cool . . .well you know what, i think i am going to order a set, do they fit front and rear?
or just front?
also would it be cheaper to get these with the two front CMS coil overs? because of postage.
cos i am definitely very keen m8.
Rohan 84ET
shanec86
Administrator
Posts: 1454 Joined: Mon Jul 03, 2006 8:00 pm
Location: Melbourne
Contact:
Post
by shanec86 » Tue May 22, 2007 1:18 pm
They wont fit the rears.
Postage will be the same because each packages already weighs a lot. and its over 20 somthing kg put together.
Ill ask my manufacturer if they can make some rears up. but im going to do these in a group buy if they get done. so there needs to be numbers!
shanec86
Rohan 84ET
Posts: 1429 Joined: Thu Feb 08, 2007 9:51 pm
Location: Adelaide, South Australia
Post
by Rohan 84ET » Fri Jun 15, 2007 12:03 am
these brakes are the best thing since sliced bread.
ET coming back from the dead.
SAVE ME JEBAS!
Rohan 84ET
etking
Posts: 1214 Joined: Mon Aug 07, 2006 12:42 pm
Location: Hobart, Tas
Post
by etking » Fri Jun 15, 2007 10:37 am
lucky i just bought some then
Members Ride:
http://forum.n12turbo.com/viewtopic.php?t=6786
85 ET, M/tech LT10X, T28, FMIC 2.5" Stainless Piping, 3" Intake, Dump n Zorst, JDM Inlet, CA18DET Injectors, Bosch 040, Bodykit, 17s
etking
Rohan 84ET
Posts: 1429 Joined: Thu Feb 08, 2007 9:51 pm
Location: Adelaide, South Australia
Post
by Rohan 84ET » Tue Jun 19, 2007 5:07 pm
ay men et.turbo.dude, i want my brakes to be full round clean CMS performance slotted and drilled rotors . . . . .CMS FTW.
now just waiting on CMS rear rotors to be manufactured, any thoughts or progress on this at all shane?
or are you waiting for more numbers?
ET coming back from the dead.
SAVE ME JEBAS!
Rohan 84ET
etking
Posts: 1214 Joined: Mon Aug 07, 2006 12:42 pm
Location: Hobart, Tas
Post
by etking » Wed Sep 12, 2007 1:45 pm
nice work, mine will be going on very shortly, cant wait
thanks for your work shaneo
Members Ride:
http://forum.n12turbo.com/viewtopic.php?t=6786
85 ET, M/tech LT10X, T28, FMIC 2.5" Stainless Piping, 3" Intake, Dump n Zorst, JDM Inlet, CA18DET Injectors, Bosch 040, Bodykit, 17s
etking
shanec86
Administrator
Posts: 1454 Joined: Mon Jul 03, 2006 8:00 pm
Location: Melbourne
Contact:
Post
by shanec86 » Sun Nov 07, 2010 6:07 pm
Brakes are in stock ready to go!
shanec86