N12Turbo.com lanyards are now available! Click here to visit the shop
Calderpark Drags - Fri 29th Sep
Calderpark Drags - Fri 29th Sep
Just letting ya's know im heading off to the drags tommorrow to enter the ET with the new gearbox. Hopefully i can come home with a 13 second timeslip this time
Look out for the Red ET.. you CANT miss it hehehehe
ill let you all know how i go. i cant wait!
Look out for the Red ET.. you CANT miss it hehehehe
ill let you all know how i go. i cant wait!
162.4kw - 588.8nm
http://www.cmsperformance.net/
http://www.cmsperformance.net/
VIDEO"SSSSSSSSS please
Low Slow and Sarcastic
Always Oscar Mike on the AO
www.twitter.com/garagepanda for my latest Inane comments
www.TasSportImages.com
Always Oscar Mike on the AO
www.twitter.com/garagepanda for my latest Inane comments
www.TasSportImages.com
lol its only just turned saturday lmfao i dont think the drags started at 12am lmao i think we wil have to wait prolly another 16-17hours before we hear back
Low Slow and Sarcastic
Always Oscar Mike on the AO
www.twitter.com/garagepanda for my latest Inane comments
www.TasSportImages.com
Always Oscar Mike on the AO
www.twitter.com/garagepanda for my latest Inane comments
www.TasSportImages.com
Yeah i no but i am on now! So i thought i would get in and ask the questionPanda_ET wrote:lol its only just turned saturday lmfao i dont think the drags started at 12am lmao i think we wil have to wait prolly another 16-17hours before we hear back
SOLD EVERYTHING TO DO WITH MY ET BUT WILL STILL BE ON HERE WATCHING AND WAITING FOR THAT RIGHT ET AGAIN.
hahaha fair enough get in early i spose lol
Low Slow and Sarcastic
Always Oscar Mike on the AO
www.twitter.com/garagepanda for my latest Inane comments
www.TasSportImages.com
Always Oscar Mike on the AO
www.twitter.com/garagepanda for my latest Inane comments
www.TasSportImages.com
well good news and bad news. I beat my PB....
bad news is i still didnt crack 13!!!!
14.09 @ 99.9mph .... how bloody close can you get!
that was a 2.39 60 footer as well.
on my last run i did a 2.2 second 60' and missed 3rd gear. that would have been the 13 second run hahah. but then it started to rain so i didnt get to go again.
I noticed a few problems and reasons why i didnt crack 13.
This time i had 205/45/16's on it. Letting the pressure in the tyres down did nothing. The side walls didnt flex at all.
Also it didnt like 7500rpm @ 15psi so i had to wind it down to 13psi on the 14.09 run.
Next time i will have the heatshield/airbox. Slicks and a better tune and wind the boost up... i just couldnt get it off the line properly
bad news is i still didnt crack 13!!!!
14.09 @ 99.9mph .... how bloody close can you get!
that was a 2.39 60 footer as well.
on my last run i did a 2.2 second 60' and missed 3rd gear. that would have been the 13 second run hahah. but then it started to rain so i didnt get to go again.
I noticed a few problems and reasons why i didnt crack 13.
This time i had 205/45/16's on it. Letting the pressure in the tyres down did nothing. The side walls didnt flex at all.
Also it didnt like 7500rpm @ 15psi so i had to wind it down to 13psi on the 14.09 run.
Next time i will have the heatshield/airbox. Slicks and a better tune and wind the boost up... i just couldnt get it off the line properly
162.4kw - 588.8nm
http://www.cmsperformance.net/
http://www.cmsperformance.net/
- photoglossy
- Posts: 2135
- Joined: Wed Aug 02, 2006 10:23 pm
- Location: Auckland, NZ
- Contact:
any engine bay pics shaneo?
congrats on 14.09, 13s definitely next time when you sort those small problems out, very good effort!
congrats on 14.09, 13s definitely next time when you sort those small problems out, very good effort!
Members Ride: http://forum.n12turbo.com/viewtopic.php?t=6786
85 ET, M/tech LT10X, T28, FMIC 2.5" Stainless Piping, 3" Intake, Dump n Zorst, JDM Inlet, CA18DET Injectors, Bosch 040, Bodykit, 17s
85 ET, M/tech LT10X, T28, FMIC 2.5" Stainless Piping, 3" Intake, Dump n Zorst, JDM Inlet, CA18DET Injectors, Bosch 040, Bodykit, 17s
- thepurplepulsar
- Administrator
- Posts: 568
- Joined: Tue Jul 04, 2006 5:48 pm
- Location: Whistler, Canada.
last time it was doing 2.4-2.6 second..
the last run i got the hang of it (2.2) but i missed 3rd then it rained. so next time!
the last run i got the hang of it (2.2) but i missed 3rd then it rained. so next time!
162.4kw - 588.8nm
http://www.cmsperformance.net/
http://www.cmsperformance.net/