Hi,
I'm going to change out the oil in the gearbox/transaxle, and the oil fill hole is in a pretty awkward spot- on the side for some random reason.
Question, would it be safe and possible to fill it up via the spot where the speedo cable and nylon gear assembly pulls out at the top?
Seems a lot less hassle- just put 2.7 litres in.. Or is there a hidden danger in doing this I don't realise?
N12Turbo.com lanyards are now available! Click here to visit the shop
Transaxle Gear oil filling alternate point- Speedo cbl hole?
i Can't think of a reason that you couldn't fill it through the speedo drive, but its not hard to fill the box through the oil filler though. Squeeze bottle, and a 1/2mtr length of pvc hose, where is the issue?
Damo
Damo
Do humanity a favor, use your brain and fight the forces of WOO WOO!
http://www.youtube.com/watch?v=G1mrbxhWU5Y
http://www.youtube.com/watch?v=G1mrbxhWU5Y
Do it from the top with a funnel and hose if you like.
Damo
Damo
Do humanity a favor, use your brain and fight the forces of WOO WOO!
http://www.youtube.com/watch?v=G1mrbxhWU5Y
http://www.youtube.com/watch?v=G1mrbxhWU5Y
funnel and hose works a treat, but can be done through speedo if you need to
Members Ride: http://forum.n12turbo.com/viewtopic.php?t=6786
85 ET, M/tech LT10X, T28, FMIC 2.5" Stainless Piping, 3" Intake, Dump n Zorst, JDM Inlet, CA18DET Injectors, Bosch 040, Bodykit, 17s
85 ET, M/tech LT10X, T28, FMIC 2.5" Stainless Piping, 3" Intake, Dump n Zorst, JDM Inlet, CA18DET Injectors, Bosch 040, Bodykit, 17s