N12Turbo.com lanyards are now available! Click here to visit the shop
e15et in a MINI!!!
- dexi_styles
- Posts: 1227
- Joined: Fri Aug 25, 2006 1:49 pm
- Location: South Brisbane
e15et in a MINI!!!
hey i just found this web site with this.....
an E15ET in a mini how cool
would be good if it is a real project!!
here i put the web page up if you guys are interested...
http://www.geocities.com/modifiedminis/cherry.html
dexter.
an E15ET in a mini how cool
would be good if it is a real project!!
here i put the web page up if you guys are interested...
http://www.geocities.com/modifiedminis/cherry.html
dexter.
yeh its reall seen one in tassie, FK it hauled
Low Slow and Sarcastic
Always Oscar Mike on the AO
www.twitter.com/garagepanda for my latest Inane comments
www.TasSportImages.com
Always Oscar Mike on the AO
www.twitter.com/garagepanda for my latest Inane comments
www.TasSportImages.com
- dexi_styles
- Posts: 1227
- Joined: Fri Aug 25, 2006 1:49 pm
- Location: South Brisbane
mini
nah i dont think it had much info just said it was a work in progress. yeah ive seen them with the suzuki swift engine but an e15et would fly!!!
the one down here didnt have the injection on it it run a holley carby in a blow thru setup and it was loud lol never rode in it i rekon itd be too scary the E15et weighs so much
Low Slow and Sarcastic
Always Oscar Mike on the AO
www.twitter.com/garagepanda for my latest Inane comments
www.TasSportImages.com
Always Oscar Mike on the AO
www.twitter.com/garagepanda for my latest Inane comments
www.TasSportImages.com
- cherryturbojames
- Posts: 130
- Joined: Thu Aug 17, 2006 8:18 am
- Location: Bristol, England
- Contact:
- Ben Hewitson
- Posts: 1136
- Joined: Tue Aug 08, 2006 9:19 am
- Location: Adelaide, SA.
- Contact:
- tassuperkart
- Administrator
- Posts: 5578
- Joined: Wed Jul 05, 2006 8:39 pm
- Location: Southern Tasmania
- Contact:
What a keen bit of kit.
There was a Mini running around in Sydney years ago with an entire Cordia Turbo engine/drivetrain!
They simply cut off the Mini at the firewall, shortened up the Cordia frontend to the Mini width (or thereabouts), welded the frontend onto the Mini body and somehow wrapped the mini guards and bonnet around the cordia powerplant.
I have not actually seen it but my M8 has and evidently this thing went pretty well and actually still looked like a Mini!!!
L8tr
E
There was a Mini running around in Sydney years ago with an entire Cordia Turbo engine/drivetrain!
They simply cut off the Mini at the firewall, shortened up the Cordia frontend to the Mini width (or thereabouts), welded the frontend onto the Mini body and somehow wrapped the mini guards and bonnet around the cordia powerplant.
I have not actually seen it but my M8 has and evidently this thing went pretty well and actually still looked like a Mini!!!
L8tr
E
Forcd4 wrote:Oh fuk no dude it's you a again, the oracle.
- Ben Hewitson
- Posts: 1136
- Joined: Tue Aug 08, 2006 9:19 am
- Location: Adelaide, SA.
- Contact:
one of the mini club presidents in SA was reported to have a RWD 10A mini from way back. People do crazy things to mini's. they are so cool.
Uncie-G wrote: As for the drift steering wheel, if you use this combined with earthing kit at the same time the overall road feel and torque steer gets reduced.
another crazy morris conversion
http://www.sxoc.co.uk/vbb/showthread.ph ... =mad+minor
i don't know if someone posted it here before or not, but i've been following it for a while
http://www.sxoc.co.uk/vbb/showthread.ph ... =mad+minor
i don't know if someone posted it here before or not, but i've been following it for a while
- tassuperkart
- Administrator
- Posts: 5578
- Joined: Wed Jul 05, 2006 8:39 pm
- Location: Southern Tasmania
- Contact:
theres a video of a mini van witha B16a lapping nurburgring and passing porsches on the straights ahahhaha same guys that put the gixxer engine in teh gokarts and then proceeded to melt tyres with high speed drifts lol
Low Slow and Sarcastic
Always Oscar Mike on the AO
www.twitter.com/garagepanda for my latest Inane comments
www.TasSportImages.com
Always Oscar Mike on the AO
www.twitter.com/garagepanda for my latest Inane comments
www.TasSportImages.com
and where does one find these videosPanda_ET wrote:theres a video of a mini van witha B16a lapping nurburgring and passing porsches on the straights ahahhaha same guys that put the gixxer engine in teh gokarts and then proceeded to melt tyres with high speed drifts lol
Mods: GT28R, Microtech lt10s, stg3 cam, double valve springs, vn intake to vl external pump, mapassi @ 50psi, 3inch dump to 2 1/2 system, vl throttle, NPC clutch, 160HP @ wheels on 12psi
"power to the peaceful" Michael Frantii
"power to the peaceful" Michael Frantii
People do some crazy stuff with go-carts.
About 12 months ago, I seen a video of a guy who installed one of those illegal Pulse Jet engines onto his go-cart. They tested its functionality on a closed runway! It was pretty serious.
Actually, I am going to google it now!
I couldn't find the one I wanted to show you guys, but here is something similar:
http://www.techeblog.com/index.php/tech ... ed-go-kart
and
http://aardvark.co.nz/pjet/gokart.htm
There is heaps of them around on the internet.
Darren.
About 12 months ago, I seen a video of a guy who installed one of those illegal Pulse Jet engines onto his go-cart. They tested its functionality on a closed runway! It was pretty serious.
Actually, I am going to google it now!
I couldn't find the one I wanted to show you guys, but here is something similar:
http://www.techeblog.com/index.php/tech ... ed-go-kart
and
http://aardvark.co.nz/pjet/gokart.htm
There is heaps of them around on the internet.
Darren.