Uschi's 86' ET pulsar

[thepurplepulsar]

Name: Uschi
Location: QLD
Year/ Model: 1986 ET
Colour: Purple
Period of ownership: Since 2002

Performance:
12.39 @ 110mph running slicks, 1.39sec 60ft
225hp/168kw ATW (20psi)

13.65 @ 105mph (15psi) 107mph (18psi) on street tyres

Engine Mods:
Rebuilt & ballanced bottom end with 20thou oversize ACL Duralites
Nitrated Crank
Shot Peened Rods
Stage 3 cam
Port and polished head
Custom inlet & exhaust manifold
K&N pod filter
bbT28 (20psi)
600x300x70mm intercooler
VL throttle body
3" dump pipe -> 3" exhaust
Malpassi R/R regulator
550 cc injectors
Bosch internal fuel pump
LT8
Crane Hi-6 ignition system
EF Coil pack
Crane 'Firewire' leads
NPC heavy duty pressure plate (1900lb) & full faced Daiken clutch
Lightened flywheel
Oil catch can
BOV
Relocated battery

Interior Mods:
Replaced Carpet
Sports Steering wheel
Custom door trims
Few gauges
Alarm and central locking
Window tinting
Sound system
Seat covers

Exterior Mods:
CMS front coilovers
Rebuilt Rear shocks by W.W. Shockabsorbers
Lowered rear springs
Slotted & vented front discs with Prairie calipers
Slotted rear discs
Front and rear strut brace
Resprayed Paint
Sunroof.. came with car


Wheels:
14" CSS Alloys with 185/ 65/ 14 Yokohama A539
M/T 22x8x15 slicks

Future Plans:
Front & Rear sway bars
N13 box internals with LSD
Wheels

Goal:
Run a 12 second pass - Achieved
More boost - more mph, dip into the 11's?


Pics:

[Jayman]

nice paint man, looks sik

[photoglossy]

Stick some slicks on there and you should be deep into the 12's... cant wait to hear more from you

[raddavey]

Looks good, nice to see a 13sec with street tyres.


Do you have any pictures of the custom inlet and exhaust manifold?
Engine bay Pics?

[thepurplepulsar]

Cheers for the comments guys.

Raddavey here's an old, rough pic of my engine bay with the manifolds:


Some assorted photo's...

Brakes:






Suspension rebuild by W.W. Shockabsorbers:


NPC 1900lb pressure plate, clutch and my flywheel:




How I baught the car:






Fresh paint:


Plus old engine bay:


Old piping:

[exanator]

very nice mate....what has she cost u so far???

[thepurplepulsar]

very nice mate....what has she cost u so far???

Ha... more than enough.

[BQ.05.TD]

asi have said b4 man i love this car look great. but usay u have the n13 box internals with lsd. is that the race tech one.

justin

[photoglossy]

N13 internals with LSD is part of his future mods.

[BQ.05.TD]

oops my bad didnt c that lol

[thepurplepulsar]

Yeah as photoglossy said it's in the future plans part. I'll go the n13 internals and see if I can get one of those 'Phantom Grip' style LSD's made to suit.

That won't be till my existing box dies, but it seems to be holding up fine at the moment.. although I haven't run it on slicks yet haha.

[ET_sar]

Pics:




Hey this doesnt happin to be in Maryborough at jaretts dyno??
if so who ran it on the dyno?? Jarett??

[Langley84]

Interesting Colour!

[thepurplepulsar]

Interesting Colour!

Yeah it's not bad, turns alot of heads haha. The pics don't really pick up the blue pearl thats through it.

Hey this doesnt happin to be in Maryborough at jaretts dyno??
if so who ran it on the dyno?? Jarett??

Sure was. A mate of mine Matt did the tuning and Cameron ran the dyno.

[ET_sar]

He didnt try to get the car up to f*k*n high on the dyno and make it nilly fall off Wide open in with a 360hp at the treads Ca? he did that with matties. Tool!