N12Turbo.com lanyards are now available! Click here to visit the shop
Microtech ECU remapping
Microtech ECU remapping
Just out of interest does anyone know how much Microtech charge to have the e15 base map installed on an ECU that has previously been fitted to something else. Does it vary from model to model.
- photoglossy
- Posts: 2135
- Joined: Wed Aug 02, 2006 10:23 pm
- Location: Auckland, NZ
- Contact:
i just paid 180 for a reset and remap and chekup
FEAR THE N12 FURY!!!.....
More kick than a goat on crack
Mods Done:
3" zaust turbo back, EGI Manifold , Lowered, 20% tint, Japspec Stearing rack, ,intercooled, hypergear tr28kai, suede lether intereor, Electric blue repsray, 16's, koni shocks all round, whiteline sway bars, strut brace, microtech with quad bosch coils.
Mods to come:
A TUNE AND ENJOY
More kick than a goat on crack
Mods Done:
3" zaust turbo back, EGI Manifold , Lowered, 20% tint, Japspec Stearing rack, ,intercooled, hypergear tr28kai, suede lether intereor, Electric blue repsray, 16's, koni shocks all round, whiteline sway bars, strut brace, microtech with quad bosch coils.
Mods to come:
A TUNE AND ENJOY
mine was a ltx-8, it had a run in with a power surge, i sent it off through a business "vpw" in epping and the charge was 350 remap, direct to microtech repairs 180 for remap and check.
FEAR THE N12 FURY!!!.....
More kick than a goat on crack
Mods Done:
3" zaust turbo back, EGI Manifold , Lowered, 20% tint, Japspec Stearing rack, ,intercooled, hypergear tr28kai, suede lether intereor, Electric blue repsray, 16's, koni shocks all round, whiteline sway bars, strut brace, microtech with quad bosch coils.
Mods to come:
A TUNE AND ENJOY
More kick than a goat on crack
Mods Done:
3" zaust turbo back, EGI Manifold , Lowered, 20% tint, Japspec Stearing rack, ,intercooled, hypergear tr28kai, suede lether intereor, Electric blue repsray, 16's, koni shocks all round, whiteline sway bars, strut brace, microtech with quad bosch coils.
Mods to come:
A TUNE AND ENJOY
Thanks for the responses everyone. Just another quick question while we're at it. When buying an ECU, be it new or 2nd hand do they come with the plugs out of the ECU and wiring to hook into your own or do you need to have plugs made up to suit the ECU and your wiring. Really keen to start looking around.
- photoglossy
- Posts: 2135
- Joined: Wed Aug 02, 2006 10:23 pm
- Location: Auckland, NZ
- Contact:
- tassuperkart
- Administrator
- Posts: 5578
- Joined: Wed Jul 05, 2006 8:39 pm
- Location: Southern Tasmania
- Contact:
One MT-8 I bought came with a cut loom. it was cut off about 25mm from the main plugs.
Another one has nothing, just a bare ecu.
When you buy them new, they will come configged and loaded with a rough running map for your engine.
They will come with an undressed loom that you will have to add plugs and wire into your own car.
Way it is.
Some of the manufacturers are now making complete dressed harnesses for different cars but you will find the are limited to things like RB Skylines, Evo's, WRX's and so-on.
getting a dressed loom made = BIG money.
L8tr
E
Another one has nothing, just a bare ecu.
When you buy them new, they will come configged and loaded with a rough running map for your engine.
They will come with an undressed loom that you will have to add plugs and wire into your own car.
Way it is.
Some of the manufacturers are now making complete dressed harnesses for different cars but you will find the are limited to things like RB Skylines, Evo's, WRX's and so-on.
getting a dressed loom made = BIG money.
L8tr
E
Forcd4 wrote:Oh fuk no dude it's you a again, the oracle.