N12Turbo.com lanyards are now available! Click here to visit the shop

PROJECT N12 WEAPON

The place to introduce yourself, post photos and specs of your car.
mrboost
Posts: 12
Joined: Wed Mar 19, 2008 10:35 pm

PROJECT N12 WEAPON

Post by mrboost »

HEY GUYS
NEW TO THIS FORUM
THOUGHT I WOULD POST UP THE N12 THAT IVE DECIDED TO START BUILDING
THOUGHT I WOULD POST A FEW PICS UP AND SHOW YOU THE BUILD UP STAGES
BEING SITTING IN MY SHED FOR 4 YEARS DOING NOTHING
JUST REBUILT MY NEW MOTOR
AND GOT IT IN TODAY TO FIND OUT MY FUEL PUMP AND TANK IS RUSTED AND STUFFED SO NEW TANK AND PUMP GOING IN TOMMOROW TO GET THE NEW MOTOR RUNNING
NEW MOTOR =
FORGED INTERNALS
T25G TURBO
CA18DET INJECTORS
CA18DET AFM
RELOCATION OF AFM TO FRONT OF PASSANGER SIDE WHEEL WITH KN FILTER
fORD XF FALCON THROTTLE BODY (TWICE THE SIZE OF OF THE STOCK ONE)

FUTURE PLANS THIS YEAR
STRIP BACK ,NEW PAINT (ACID GREEN OR TURIQUES)
NEW INTERIOUR
AND NEW RIMS
THEN SHES UP FOR SALE

I GATHER PPL IN ADELAIDE WILL KNOW THIS CAR COS THE PREVIOUS OWNER USE TO DRAG IT AND ALSO HAVE IT IN CARSHOWS AND HOT4S A LONG LONG TIME AGO

Image
Image
Image

I ALSO MAKE THE FULL ET BODY KIT IF ANYONE IS INTERESTED SAME AS THE ONE IN MY PICS CHEERS
User avatar
Panda_ET
Posts: 3835
Joined: Wed Aug 02, 2006 10:02 pm
Location: Launceston
Contact:

Post by Panda_ET »

i remember this Et from Hot 4s, didnt it have the wetsuit material interior?
Low Slow and Sarcastic
Always Oscar Mike on the AO

www.twitter.com/garagepanda for my latest Inane comments

www.TasSportImages.com
mrboost
Posts: 12
Joined: Wed Mar 19, 2008 10:35 pm

Post by mrboost »

IT SURE DID CHAMP GOT IT ONE
IM THE NEW OWNER
YEP THAT INTERIOUR IS WRONG
User avatar
Ash
Administrator
Administrator
Posts: 3246
Joined: Thu Aug 03, 2006 7:17 am
Location: Wangaratta, Victoria, Australia

Post by Ash »

shit, nearly the exact same intercooler and cooler pipe setup as mine! :D should look good again by the sounds of your plan. so let me get this right, a wetsuit material interior as in seats, door trims and shit? :?
User avatar
The Renegade
Administrator
Administrator
Posts: 3002
Joined: Tue Jul 04, 2006 7:22 pm
Location: Telegraph Point - N.S.W. Mid North Coast

Post by The Renegade »

Hey Bud, welcome to the forum!
I remember that car, jeez it's been a while.
So you're just fixing it up to sell it? Don't reckon you'll keep it?
--------------------
Trust no-one but yourself.

The beast:
http://forum.n12turbo.com/viewtopic.php?t=3982
=====================
Mid North Coast Member. :twisted:
=====================
User avatar
Panda_ET
Posts: 3835
Joined: Wed Aug 02, 2006 10:02 pm
Location: Launceston
Contact:

Post by Panda_ET »

Ash wrote:shit, nearly the exact same intercooler and cooler pipe setup as mine! :D should look good again by the sounds of your plan. so let me get this right, a wetsuit material interior as in seats, door trims and shit? :?
yep u got it. woulda been hot4s about 2000ish
Low Slow and Sarcastic
Always Oscar Mike on the AO

www.twitter.com/garagepanda for my latest Inane comments

www.TasSportImages.com
mrboost
Posts: 12
Joined: Wed Mar 19, 2008 10:35 pm

Post by mrboost »

yer may keep it but will sell it once finshed if someone offers me a good price
car will be like new when its done

at the moment its defect to cop shop for bold tyres and boost gauge

yer found out it was in hot4s 1999 and also previous owner with old motor got in to the high 12s at AIR should be a lot better with this new motor mate buildt it very well
also got to add its got a 1.5 copper head gasket when we did the head on the new motor
User avatar
Kimmo
Posts: 2287
Joined: Thu Nov 02, 2006 8:40 am
Location: Footscray

Post by Kimmo »

Give us a squiz at the neoprene interior!
User avatar
Panda_ET
Posts: 3835
Joined: Wed Aug 02, 2006 10:02 pm
Location: Launceston
Contact:

Post by Panda_ET »

yeh i got the magazine here. got all the magazines with n12s in them that i know of even back the hot4s a performance rotaries in the early 90s lol BIGPSI ;)

that Et was on the cover as well i think up in the right hand corner, the interior looked ok in the pics but i spose that was 1999 hey lol hyperfangs looked good back then too.

good luck with the build mate
Low Slow and Sarcastic
Always Oscar Mike on the AO

www.twitter.com/garagepanda for my latest Inane comments

www.TasSportImages.com
User avatar
SashET
Posts: 1047
Joined: Wed Aug 09, 2006 8:40 pm

Post by SashET »

Panda_ET wrote:yeh i got the magazine here. got all the magazines with n12s in them that i know of even back the hot4s a performance rotaries in the early 90s lol BIGPSI ;)

that Et was on the cover as well i think up in the right hand corner, the interior looked ok in the pics but i spose that was 1999 hey lol hyperfangs looked good back then too.

good luck with the build mate
Scan em Matt and give us a squizz....

I remember a silver ET with the plates BIGPSI in one of the mags.

Looked good at the time. I'd like to see that one again.

Cheers
Sash
kid nismo
Posts: 719
Joined: Wed Apr 11, 2007 8:58 pm
Location: Sydney

Post by kid nismo »

holy fug! whut da hell happen to the car?
I got the hot4 article on this beast in it's prime days.


Image
mrboost
Posts: 12
Joined: Wed Mar 19, 2008 10:35 pm

Post by mrboost »

hey guys do you have any more pics or stats on my car???

i brought the car of this greek bloke they trashed it
he brought it from the owner when it was prime and looked awsome then they sold the wheels and wacked those on it in my pics then they went out thrashing it AKA why i built a brandnew motor cos they blew the head and the gearbox ,they also side swiped a pole but not major damage,the interiour looked like a dog been in it but yer time to fix it up
User avatar
The Renegade
Administrator
Administrator
Posts: 3002
Joined: Tue Jul 04, 2006 7:22 pm
Location: Telegraph Point - N.S.W. Mid North Coast

Post by The Renegade »

That's the one - I remember the bloody mag but damned if I can find it. I think there was something red (gemini?) on the cover too maybe?

Looks like you have some work to do MrBoost! Be awesome to get it back to Mag spec!

Good luck mate.

By the way, the ET bodykit - post an ad in the For Sale section. Do you make them yourself? Or do you just have a bunch in your shed that you wanna shift?
--------------------
Trust no-one but yourself.

The beast:
http://forum.n12turbo.com/viewtopic.php?t=3982
=====================
Mid North Coast Member. :twisted:
=====================
User avatar
SashET
Posts: 1047
Joined: Wed Aug 09, 2006 8:40 pm

Post by SashET »

Here's what I have, I still want that mag scanned and put up here for a read.

Image

Image

And I's be inerested in a set of side skirts if they are available. PM me with some pics and prices.

Cheers
Sash
mrboost
Posts: 12
Joined: Wed Mar 19, 2008 10:35 pm

Post by mrboost »

yer cheers guys with the old pics thats awsome shame how ppl let it get like this but it will be restored to its former glory soon

i make the et kits from fibreglass i copyed the originals thats on my et and also make custom kits as well for any makes and models

i have a website

www.streetcredit.com.au

then click on eyecandy auto accessories

im not trying to plug my buisness on here either to all mods/admin ppls so i dont get banned lol
Post Reply