N12Turbo.com lanyards are now available! Click here to visit the shop
has anyone tried the jaycar boost controller?
has anyone tried the jaycar boost controller?
hi all
im just wondering if anyone has tried the jaycar boost controller, i currently have a turbtech mannual boost controller but it spikes about 2-3 psi, which is to much, im after a little more control.
so let us know if you have tried it and what you think of it or if you have heard any good things about it, also was it difficult to assemble
cheers
angel
im just wondering if anyone has tried the jaycar boost controller, i currently have a turbtech mannual boost controller but it spikes about 2-3 psi, which is to much, im after a little more control.
so let us know if you have tried it and what you think of it or if you have heard any good things about it, also was it difficult to assemble
cheers
angel
- Ben Hewitson
- Posts: 1136
- Joined: Tue Aug 08, 2006 9:19 am
- Location: Adelaide, SA.
- Contact:
Re: has anyone tried the jaycar boost controller?
i have one. i'm installing it as we speak. i've got to get some dyno time to tune it properly as its not closed loop.angel wrote:hi all
im just wondering if anyone has tried the jaycar boost controller, i currently have a turbtech mannual boost controller but it spikes about 2-3 psi, which is to much, im after a little more control.
so let us know if you have tried it and what you think of it or if you have heard any good things about it, also was it difficult to assemble
cheers
angel
http://forum.nissanexa.com/showthread.php?t=32027
- Ben Hewitson
- Posts: 1136
- Joined: Tue Aug 08, 2006 9:19 am
- Location: Adelaide, SA.
- Contact:
not sure dude, i took it from a friend who got it from the intake manifold of his CA18DE.. thats about all i know.. The CA18/16DE's are covered in the darn things.. lolWXTBIX wrote:Ben,
which solenoid is it off the CA18DE? (What does it trigger)
im looking at this setup as well, Sooo many good things at Jaycar!!
Kris
i'll post up my load points when i get the controller on.
I built one but it doesnt work
Theres 64 load points isnt there ben?
with 0-100%
when i press up it goes... 0,1,2,-up to-,26,then,27,28,100,114,119,122%
like umm?? 122%?
Theres 64 load points isnt there ben?
with 0-100%
when i press up it goes... 0,1,2,-up to-,26,then,27,28,100,114,119,122%
like umm?? 122%?
162.4kw - 588.8nm
http://www.cmsperformance.net/
http://www.cmsperformance.net/
- Ben Hewitson
- Posts: 1136
- Joined: Tue Aug 08, 2006 9:19 am
- Location: Adelaide, SA.
- Contact:
interesting.. there have been a few of these that were packaged with the wrong chips on them. basically they are the same device as the Digital Fuel Adjuster but with one chip different. there is a possibility that it came packaged wrongly..shanec86 wrote:I built one but it doesnt work
Theres 64 load points isnt there ben?
with 0-100%
when i press up it goes... 0,1,2,-up to-,26,then,27,28,100,114,119,122%
like umm?? 122%?
- Paul Smith
- Posts: 575
- Joined: Thu Aug 03, 2006 4:55 pm
- Location: Brisbane
thanks paul, i might try that, i think my acuator may be a little tight, im not surePaul Smith wrote:Hey Angel. I have a Turbotech. I've only ever had a 1 psi spike. Try pulling it apart and giving it a good clean out.
doing some reading up on the jaycar boost controller and they seem pretty amazing, with good tuneabilty, also they take the load readings from the injector pulse, pretty cool.
- Ben Hewitson
- Posts: 1136
- Joined: Tue Aug 08, 2006 9:19 am
- Location: Adelaide, SA.
- Contact:
well i wired mine all up last night and it light up ok, but the LCD hand controller doesn't work.. it could be a dodgie cable but i remade the darn thing about 5 times last night. i'll have to go visit an SA member with the DFA on their car adn see if my handcontroller is fucked.. i'll keep you posted.
- Ben Hewitson
- Posts: 1136
- Joined: Tue Aug 08, 2006 9:19 am
- Location: Adelaide, SA.
- Contact: