N12Turbo.com lanyards are now available! Click here to visit the shop

$60,000 EXA Turbo!

The place to introduce yourself, post photos and specs of your car.
User avatar
Paul Smith
Posts: 575
Joined: Thu Aug 03, 2006 4:55 pm
Location: Brisbane

Post by Paul Smith »

"but you only get engaged once"

Dreamer. :D
User avatar
N12Turbo
Posts: 148
Joined: Tue Jul 04, 2006 6:07 pm
Location: Toowoomba Qld
Contact:

Post by N12Turbo »

Yeah I remember the white iR from seeing it in FF's once or twice... They sure are great cars.. Missing mine lately, but funnily enough, not as much at the ET....... go figure??
User avatar
Paul Smith
Posts: 575
Joined: Thu Aug 03, 2006 4:55 pm
Location: Brisbane

Post by Paul Smith »

Makes sense Dave. You put a lot more effort into the ET didn't you?
User avatar
txateu
Posts: 246
Joined: Thu Sep 14, 2006 10:44 pm
Location: Melbourne

exa 4 sale

Post by txateu »

Good luck with that Ben i hope it all goes well with the engagement, yeah i only plan on getting engaged once too! And when the bling costs $5000+... it makes my car take longer :(
cheers Michael,
ETEEZN

Re: $60,000 EXA Turbo!

Post by ETEEZN »

EXADean wrote:Name: Dean
Location: Sydney
Year/ Model: 1984
Colour: Factory white
Period of ownership: 12 years

Performance: Around 200kW at engine at 1.3 bar.

Engine Mods: EVERYTHING!!! 1.6-litres, E16 crank, shot-peened turbo rods, forged 7.4:1 pistons, O-ringed block, copper head gasket, heavily ported head, heavier valve springs, mild cam, three-angle-cut valves, match ported intake and exhaust manifolds, ExtrudeHoned intake and exhaust manifolds, 5mm oversize throttle body, 550cc injectors, adjustable fuel regulator, Bosch fuel pump, Garrett T25 turbo, water-cooled, custom cross-flow front-mount intercooler behind front bar, Samco hoses, alloy piping with 90-degree mount, Haltech E6A tuned on Silverwater Automotive dyno, HKS racing by-pass valve (venting through K&N), custom stainless drop-pipe, resonator, 2.5-inch exhaust, HKS Hiper muffler. Spent $11,000 on engine!
Battery moved to boot, radiator reservoir relocated to left side,
Standard gearbox - however I spent $3000 on a spare with a 4.2:1 (vs 3.9:1) Nissan Motorsports diff and custom-fitted N13 LSD. (Cannot run speedo though and needs custom driveshafts - put into too hard basket for street car).

Interior Mods: Full Recaro MOMO make-over: Red Recaro SRD seats (ala Integra Type R), MOMO seerring wheel and gearknob, interior condition is immaculate, car has sat in a garage under a car cover for much of the last 10 years. MB Quart speakers, Rockford Fosgate amp, Sony CD deck which, along with HKS exhaust temp and boost gauges are colour matched to the factory gauges. Everything works perfectly, from the demister to the air-conditioning. HKS electronic boost controller with overboost trigger near handbrake (from 1.0 to 1.3 bar). Levoc full-auto turbo timer.
ET Pulsar driver's footrest, with Levoc pedals. ET Pulsar centre console housing graphic equaliser and spectrum analyser.

Exterior Mods: Debadged (as we know, there are many of them!) destickered (ditto), tinted lights, lipped guards, MX-5 quarter-panel indicators, SVD stickers, red stripe (ala Porsche 911 GT3 RS), new bumpers, colour matched mirrors, bonnet vents, pop-up surrounds, wiper jets (and wipers, though not sure about them).

Wheels: 17x7 MOMO Tuner, 215/40 Falken.

Other: Full brake conversion: Prairie front vented and ET rear discs/arms and sway bar conversion, with ET master cylinder. Lowered King springs. Fully engineered as is. Spent around $60,000 over a 10 year period, lots of trials and errors and fixes, wrote off two previous white EXAs before finally finishing this one. 131,000km original, about 500km since engine built. Planning to feature in magazines and sell.
Power output is around 150kW at wheels on 1.0 bar, so have estimated around 200kW at the engine on 1.3 bar. Welcome to torque-steer country! :twisted:

Future Plans: Sell, looking around $16,000 - about a quarter of what's been spent. Not using it anymore, seems a waste.

Pics: http://s88.photobucket.com/albums/k171/EXADean/

that is one horny looking EXA....never knew they looked that good.....AWESOME car guys, got to check this out
Android 360
Posts: 1066
Joined: Thu Feb 15, 2007 7:39 pm
Location: trying to avoid pulsar owners
Contact:

Post by Android 360 »

mate saw the fature in hot4s today, very cool!
"I wasn't born with enough middle fingers, I don't need to choose a side."
User avatar
Ben Hewitson
Posts: 1136
Joined: Tue Aug 08, 2006 9:19 am
Location: Adelaide, SA.
Contact:

Post by Ben Hewitson »

yey. we were both in Hot fours yesterday... i'll scan the article once my computer is reassembled and host it up.
Uncie-G wrote: As for the drift steering wheel, if you use this combined with earthing kit at the same time the overall road feel and torque steer gets reduced.
User avatar
Ash
Administrator
Administrator
Posts: 3246
Joined: Thu Aug 03, 2006 7:17 am
Location: Wangaratta, Victoria, Australia

Post by Ash »

so is this puppy for sale still? seeing as it was in the latest hot 4's mag it might get some more interest.
User avatar
Ben Hewitson
Posts: 1136
Joined: Tue Aug 08, 2006 9:19 am
Location: Adelaide, SA.
Contact:

Post by Ben Hewitson »

i'd have it..
Uncie-G wrote: As for the drift steering wheel, if you use this combined with earthing kit at the same time the overall road feel and torque steer gets reduced.
J
Posts: 2
Joined: Sun Oct 12, 2008 5:21 pm

Post by J »

my god where is this car now?! i can't find a modded n12 in good condition anywhere! i'm 2 yars too late :'(
Android 360
Posts: 1066
Joined: Thu Feb 15, 2007 7:39 pm
Location: trying to avoid pulsar owners
Contact:

Post by Android 360 »

im sure he'd still have it.. not many people out there willing to spend more than a few 1000 on a decent n12..

dunno if its still up for sale, it's been over a year since i heard of it last... when it was in hot4s...
but my vert's up for 10k if you're keen on something different lol
"I wasn't born with enough middle fingers, I don't need to choose a side."
J
Posts: 2
Joined: Sun Oct 12, 2008 5:21 pm

Post by J »

cheers mate, but i'm not a fan of convertibles :)...i'll try and chase this one down, or something like this!
User avatar
EXADean
Posts: 6
Joined: Thu Sep 21, 2006 12:48 pm
Location: Sydney, Australia

$60,000 EXA Turbo!

Post by EXADean »

Logged on after a while away and noticed the pic link was dead, so have uploaded direct.
Attachments
Seats.jpg
Seats.jpg (72.85 KiB) Viewed 122659 times
rear.jpg
rear.jpg (51.5 KiB) Viewed 122659 times
front.jpg
front.jpg (40.39 KiB) Viewed 122659 times
EXAJpegs_058.jpg
EXAJpegs_058.jpg (63.92 KiB) Viewed 122659 times
EXAJpegs_056.jpg
EXAJpegs_056.jpg (52.39 KiB) Viewed 122659 times
EXAJpegs_041.jpg
EXAJpegs_041.jpg (46.19 KiB) Viewed 122659 times
EXAJpegs_040.jpg
EXAJpegs_040.jpg (52.01 KiB) Viewed 122659 times
dash.jpg
dash.jpg (74.07 KiB) Viewed 122659 times
EXAJpegs_035.jpg
EXAJpegs_035.jpg (64.45 KiB) Viewed 122659 times
EXAJpegs_025.jpg
EXAJpegs_025.jpg (63.28 KiB) Viewed 122659 times
User avatar
EXADean
Posts: 6
Joined: Thu Sep 21, 2006 12:48 pm
Location: Sydney, Australia

$60,000 EXA Turbo!

Post by EXADean »

Pics part 2 of 2
Attachments
headon.jpg
headon.jpg (37.54 KiB) Viewed 122659 times
EXAJpegs_055.jpg
EXAJpegs_055.jpg (75.83 KiB) Viewed 122659 times
EXAJpegs_054.jpg
EXAJpegs_054.jpg (36.78 KiB) Viewed 122659 times
EXAJpegs_053.jpg
EXAJpegs_053.jpg (85.61 KiB) Viewed 122659 times
EXAJpegs_051.jpg
EXAJpegs_051.jpg (75.55 KiB) Viewed 122659 times
EXAJpegs_050.jpg
EXAJpegs_050.jpg (81.93 KiB) Viewed 122659 times
EXAJpegs_049.jpg
EXAJpegs_049.jpg (53.34 KiB) Viewed 122659 times
EXAJpegs_043.jpg
EXAJpegs_043.jpg (39.27 KiB) Viewed 122659 times
Post Reply