Discord Server: N12Turbo.com now has a Discord server! Let's keep the community alive. We hope to see you there: https://discord.gg/3MDhUZb

Still building

The place to introduce yourself, post photos and specs of your car.
Post Reply
Forcd4
Posts: 140
Joined: Wed Sep 13, 2006 8:53 pm

Still building

Post by Forcd4 »

Hey all,

Been years since I've even looked around the forum but from time to time i still get a little progress in. Been quite a few changes i tossed 95% of what i had in parts and had all but moved on from the et world. Came across another sedan 1 owner 90,000km on the clock not a mark on it inside or out so it was back on.

Have modified yaris electric power steering which i highly recommend, turbo is now a 3076r 42mm external gate have since these photos got an oil filler cap welded on, oil and water fittings complete, dump pipe wrapped and amazingly i wired it up to the wolf and had a walbro pump in a bucket and after maybe 5 years since of mods and forgotten knowledge it turned over first time and idled like new. Changed to all discs, got works wheels +35 offset extended wheel studs they sit 50mm past the guards probably fender flares but thats well into the future

Engine still isn't in the car, its an automatic and just in the process of club reg then slowly ill chip away at it.

So there it is its still a project in construction who knows if it will ever be finished i wont be chasing any power nunbers just to be able to drive a car that has less than 7 cup holders and i change the gears will be enough

Cheers




ImageImage
20200524_113115.jpg
20200524_113115.jpg (73.73 KiB) Viewed 238 times
Attachments
E15
E15
20201205_104755.jpg (64.23 KiB) Viewed 238 times
" Friends may come and go but 200lbs is always 200lbs " - Henry Rolland -
User avatar
etking
Posts: 1214
Joined: Mon Aug 07, 2006 12:42 pm
Location: Hobart, Tas

Still building

Post by etking »

Impressive
Members Ride: http://forum.n12turbo.com/viewtopic.php?t=6786
85 ET, M/tech LT10X, T28, FMIC 2.5" Stainless Piping, 3" Intake, Dump n Zorst, JDM Inlet, CA18DET Injectors, Bosch 040, Bodykit, 17s
Post Reply