N12 Turbo Forums

umm ok well from the idea of drilling and tapping the waistgate on the inside od the comp housing is a no go dosnt matter which way i have put it it'll have the valve pointing to the gearbox do i have made a bracket that uses the 2 bolts on the waistgate plate bolted to the 12mm bolt on the gear box support brace with 6mm alloy plate.

Once rooting round with that crap and NO beers i did the lovely thing and started on my 3" dump pipe which now is all pined up and removed ready for welding.

after that and the turbo are all fitted on and good then ill put her together and work on the intercooler pipes.

Any positive feed back ?

You can bracket it off your adapter onto the front of the compressor housing.
Thats how i originally did it when i fitted a T25g

You might have to extend your actuator rod tho. if you weld this, do it quickly and douse the rod with water to cool it sos you dont burn the actuator diaphragm.

L8r
Oracle

If u got pics that would help

Naaaaahhhh sry M8 it was a long time ago. No pix taken.

Oracle

dump pipe made that is all

rosscotron wrote:If u got pics that would help

Ill send you a photo of mine, you can buy the uni bracket from any auto shop or turbo shop. its adjustable so you can position it where you need it.

will mms you the pic.

Dex

ok well turbo is on and everything fitted up nicely and now running all is needed is to cut out alloy flange for comp intake and fit cooler and sort out the pipes.

just like to add the dump pipe from scratch cost me $23

well she's on the road now here some final pics





[/img]http://i1165.photobucket.com/albums/q59 ... 71.jpg[img][/img]

OLD


NEW

nice work dude keep it up

thanks man runs well

hey guys finished painting my RRC the colour in the pics looks darker in person close to original colour but u get the idea

OLD !!!


NEW !!!

Good job bro I like it

thanks mate its coming along slowly i got a vid but its 400mb lol

Just keep chippin away at it, shit just takes to long these days ha ha.