Page 1 of 4
Rosscos NEW ET *UPDATED VIDS*
Posted: Fri Mar 30, 2012 6:45 pm
by rosscotron
hey guys this was my 1st ever ET 12years ago just had boost, exhaust, filter and Relocate AFM
Will post pics of my project soon
Posted: Sat Mar 31, 2012 10:21 pm
by shanec86
mmmmm nice and clean. i like it
Posted: Sat Mar 31, 2012 11:24 pm
by dexi_styles
Hehehe
I got one of those blow off valves. You want it for your new ET?
You can have it! It's got all the features.....
Loose spring, Boost leak. I think that's all....
It's free!
Ps nice car.
Dex
Update !!
Posted: Sun Apr 01, 2012 8:51 pm
by rosscotron
Ok so car arrived 3:30 sat afternoon and 1st thing i did was compression test and all is good !! clean out car and make sure all oil and water is good and everything looks like in good working order ! COOL so hook the battery up which is in the boot and pump primes and NOTHING !! muck round with terminals and starter wires anyway by sun afternoon figuring out its the starter motor i go grab one off DEXI !! put her in and BANG 1st go. Sound great and good with no exhaust and thanx again DEXI.
So ill keep updating you guys as i go along here are some pics
Here is the Lightened Flywheel and heavy duty clutch
Posted: Sun Apr 01, 2012 10:22 pm
by poeticjustice88
i wouldn't have missed you by much man, was over with dexi this afternoon grabbing a couple of spare parts
Posted: Sun Apr 01, 2012 10:29 pm
by dexi_styles
poeticjustice88 wrote:i wouldn't have missed you by much man, was over with dexi this afternoon grabbing a couple of spare parts
Yeah Michael,
By the time you left I cleaned up changed and helped in the kitchen for enough time to only sharpen the knife.... Bout 5 mins.
No prob Ross you helped me more then I helped you. I need to get most these parts out before I become a hoarder!
Can't wait til she's done!
Cheers man,
Dexi
Update (after road test)
Posted: Fri Apr 06, 2012 1:44 pm
by rosscotron
Posted: Fri Apr 06, 2012 7:20 pm
by Damo
FARK.......It looks like I am going to have to become proficient at MT hand controller programming.
Looks good.
Damo
Posted: Fri Apr 06, 2012 8:59 pm
by dexi_styles
Looking good man!
And Damn I do love those rims, kinda dreaded swapping them. But think we both come out alright.
It is gonna be good to drive around with ya
Good work man
Dex
Thanks
Posted: Fri Apr 06, 2012 9:03 pm
by rosscotron
Yeah coming along slowly only had it a week and welded exhaust up and fitted with new flex pipe moded control arm for 16s ect ect pretty good considering it wasnt running at all and been sitting in a back yard for god knows but finally got to drive it today yay big thanx to dexi's help and parts too
Posted: Fri Apr 06, 2012 9:06 pm
by dexi_styles
Damo wrote:FARK.......It looks like I am going to have to become proficient at MT hand controller programming.
Looks good.
Damo
This might come in handy when we meet. I'm gonna write a list... J/K but seriously, you could help.
Dex
Hehe
Posted: Fri Apr 06, 2012 9:10 pm
by rosscotron
Yeah dexi I'll clean them up on the weekend not sure if the wheels have different offsets for only 2 rims made for the rear but only slight rub on shocks now but I like the look of them :p
Update
Posted: Thu May 03, 2012 5:56 pm
by rosscotron
Ok so at the moment fixed the alternator problem (missing 1 low bolt and stripped top tension bolt) retapped and fitted 10mm bollt and replaces blow bolt.
It has now been pulled off the road and little intercooler replaced with a 600x300x80 cooler currently fitting.
And also replacing the T2 with a Garrett T25 yet to rotate housing ect yet
Posted: Thu May 03, 2012 10:31 pm
by dexi_styles
Shit!
You only got it on the road last week! Don't you want to drive it a little?
Dex
Posted: Fri May 04, 2012 7:47 pm
by tassuperkart
Baaaaaaahahahahahahahahaha the bug has bitten this guy big time!!!!!!!
Your hooked Ross you fuckwit!!!!!!! H5!!!!!
Welcome to the sickness my friend!!!
Cheers
Oracle
oils, water and filters today with a few sensors ect and a degrease of the engine bay and its almost there here are a few pics.
