N12Turbo.com lanyards are now available! Click here to visit the shop
Renegade's CA18DET Powered GXE Pulsar (updated 16-06-08)
- The Renegade
- Administrator
- Posts: 3002
- Joined: Tue Jul 04, 2006 7:22 pm
- Location: Telegraph Point - N.S.W. Mid North Coast
Hey Guys - Time for an update.
Had some spare hours so thought I'd take on the hardest part of
Project Emo Interior!!!
So far I'd put in the black Exa seats, black carpet and a few black plastics, and now:
-The Dash .....
I also took the chance to move the E-Boost & mount the EMS, add my A/F Gauge (although not hooked up yet) and add my digital Tacho. The digital tacho has a rather cool blue shift light that's nice and discreet, until it goes off in your face.
I still have to clean up in there yet....
Before:
After:
Had some spare hours so thought I'd take on the hardest part of
Project Emo Interior!!!
So far I'd put in the black Exa seats, black carpet and a few black plastics, and now:
-The Dash .....
I also took the chance to move the E-Boost & mount the EMS, add my A/F Gauge (although not hooked up yet) and add my digital Tacho. The digital tacho has a rather cool blue shift light that's nice and discreet, until it goes off in your face.
I still have to clean up in there yet....
Before:
After:
--------------------
Trust no-one but yourself.
The beast:
http://forum.n12turbo.com/viewtopic.php?t=3982
=====================
Mid North Coast Member.
=====================
Trust no-one but yourself.
The beast:
http://forum.n12turbo.com/viewtopic.php?t=3982
=====================
Mid North Coast Member.
=====================
nice work but.....eboost reads -20 =PHAIL
Low Slow and Sarcastic
Always Oscar Mike on the AO
www.twitter.com/garagepanda for my latest Inane comments
www.TasSportImages.com
Always Oscar Mike on the AO
www.twitter.com/garagepanda for my latest Inane comments
www.TasSportImages.com
- The Renegade
- Administrator
- Posts: 3002
- Joined: Tue Jul 04, 2006 7:22 pm
- Location: Telegraph Point - N.S.W. Mid North Coast
Panda_ET wrote:nice work but.....eboost reads -20 =PHAIL
??? What do you mean?
At idle engine reads about -20mmHg to -22mmHg when warm.
SashET wrote:You didn't like the look of the cream/tan interior?
Why the change?
Cheers
Sash
Was the stock original GXE Pulsar pov tan interior.
Very Ghay.
And very uncomfortable.
--------------------
Trust no-one but yourself.
The beast:
http://forum.n12turbo.com/viewtopic.php?t=3982
=====================
Mid North Coast Member.
=====================
Trust no-one but yourself.
The beast:
http://forum.n12turbo.com/viewtopic.php?t=3982
=====================
Mid North Coast Member.
=====================
Oh i thought the Eboost was saying -20 points for the bleckThe Renegade wrote:Panda_ET wrote:nice work but.....eboost reads -20 =PHAIL
??? What do you mean?
At idle engine reads about -20mmHg to -22mmHg when warm.
we expect to have the picture taken at speed under 1.5bar
Low Slow and Sarcastic
Always Oscar Mike on the AO
www.twitter.com/garagepanda for my latest Inane comments
www.TasSportImages.com
Always Oscar Mike on the AO
www.twitter.com/garagepanda for my latest Inane comments
www.TasSportImages.com
-
- Posts: 1066
- Joined: Thu Feb 15, 2007 7:39 pm
- Location: trying to avoid pulsar owners
- Contact:
- The Renegade
- Administrator
- Posts: 3002
- Joined: Tue Jul 04, 2006 7:22 pm
- Location: Telegraph Point - N.S.W. Mid North Coast
Yup, when I come up for the cruise I'll be picking up black plastics, trims and hood lining!mr et wrote:Looking good dude.... now all ya gotta do is piss of the door trims too hehehe
I was waiting for someone to pick it! One part I had to rape from the Exa.Callumgw wrote:SWISH!, but get rid of the ghay pink glove box latch.
C
I'll see what I can do. I'll video it when it gets dyno'd!Panda_ET wrote: Oh i thought the Eboost was saying -20 points for the bleck
we expect to have the picture taken at speed under 1.5bar
I'll be up at the end of next month for the cruise! And every other cruise up there!70RQE2001 wrote:Looking goood!
Can't wait to see this thing, you'll have to come up to the Gold Coast for a cruise in a few mths when mines finished too!
I was gonna put the turbo one in but the plugs are different and my gas soldering iron was out of gas from all the wiring I fixed that was behind the dash.Android 360 wrote:black is much nicer..
u need a decent gauge cluster tho lol
the massive clock?? wtf? lol
--------------------
Trust no-one but yourself.
The beast:
http://forum.n12turbo.com/viewtopic.php?t=3982
=====================
Mid North Coast Member.
=====================
Trust no-one but yourself.
The beast:
http://forum.n12turbo.com/viewtopic.php?t=3982
=====================
Mid North Coast Member.
=====================
-
- Posts: 1066
- Joined: Thu Feb 15, 2007 7:39 pm
- Location: trying to avoid pulsar owners
- Contact:
- The Renegade
- Administrator
- Posts: 3002
- Joined: Tue Jul 04, 2006 7:22 pm
- Location: Telegraph Point - N.S.W. Mid North Coast
Android 360 wrote:install a tacho in the clock spot then or some other gauge lol
the clock is strange..
OMGZ MY CARS GOING 1:52PM!!!!!!!11!11!!!!!!1
LoL you have to take into consideration that I'm one of the older fuckers on here and this way I can see what time it is without needing my grampa specs!
Actually, I did measure up but nothing was the right size ... either too big or small. And I didn't want to be a wank and have 2 tacho's (I already have the digital one) Then I thought about a completely rebuilt dash with a big Autometer speedo and a small fuel, oil n water temp, & oil n fuel pressure gauges around it. It'll happen, just not yet.
--------------------
Trust no-one but yourself.
The beast:
http://forum.n12turbo.com/viewtopic.php?t=3982
=====================
Mid North Coast Member.
=====================
Trust no-one but yourself.
The beast:
http://forum.n12turbo.com/viewtopic.php?t=3982
=====================
Mid North Coast Member.
=====================
- The Renegade
- Administrator
- Posts: 3002
- Joined: Tue Jul 04, 2006 7:22 pm
- Location: Telegraph Point - N.S.W. Mid North Coast
Thanks George!GREEKMAN wrote:looking goodddddddd...
nice car glenn!!!!
--------------------
Trust no-one but yourself.
The beast:
http://forum.n12turbo.com/viewtopic.php?t=3982
=====================
Mid North Coast Member.
=====================
Trust no-one but yourself.
The beast:
http://forum.n12turbo.com/viewtopic.php?t=3982
=====================
Mid North Coast Member.
=====================
- The Renegade
- Administrator
- Posts: 3002
- Joined: Tue Jul 04, 2006 7:22 pm
- Location: Telegraph Point - N.S.W. Mid North Coast
Had some spare hours tonight .... well actually I didn't I just can't sleep. So much to my neighbors disgust I went out to the shed and turned this peice of rubbish that got ripped from the belly of my VW on the way up a mountain once:
Into this:
And painted the cooler pipe while it was off. I painted it yellow so I wouldn't trip over it if I were walking on my engine ......
All I gotta do now is paint those damn cam covers.
Into this:
And painted the cooler pipe while it was off. I painted it yellow so I wouldn't trip over it if I were walking on my engine ......
All I gotta do now is paint those damn cam covers.
--------------------
Trust no-one but yourself.
The beast:
http://forum.n12turbo.com/viewtopic.php?t=3982
=====================
Mid North Coast Member.
=====================
Trust no-one but yourself.
The beast:
http://forum.n12turbo.com/viewtopic.php?t=3982
=====================
Mid North Coast Member.
=====================