Page 1 of 2
DIY custom exhaust manifold
Posted: Sat Aug 14, 2010 8:14 pm
by PAC_ET
Currently building a custom low mount exhaust manifold with external wastegate for someone on the forum... just some pic's to start it off and once finished ill do a write up and show the final product , all done with a stick welder which im un happy about, cause i was gonna tig it up but my tig gun hasent arrived yet
Posted: Mon Aug 16, 2010 11:21 am
by born2run
damn she is looking hot cuz. cant wait to bolt up me turbo to her n try her out. oh yeah he's making the manifold for me lads...;p
Posted: Sun Aug 22, 2010 5:20 pm
by PAC_ET
born2run wrote:damn she is looking hot cuz. cant wait to bolt up me turbo to her n try her out. oh yeah he's making the manifold for me lads...;p
here you go mate
this is what she looks like after a sand blast
Posted: Wed Sep 01, 2010 7:07 pm
by PAC_ET
finished
all it needs now is a sand blast and some paint
it has perfect clearance from everything, its an awsome fit
Posted: Thu Sep 02, 2010 4:18 pm
by sgs
Dude that is f**king cool, looks like a rams head or something
Also love the samoan work boots in pic 17 lol
Posted: Thu Sep 02, 2010 5:43 pm
by PAC_ET
sgs wrote:Dude that is f**king cool, looks like a rams head or something
Also love the samoan work boots in pic 17 lol
samoan work boots lol.... cheers dude, anyone want a manifold made up??
i can make any sort to suit ur setup, hi or low mount
Posted: Tue Sep 07, 2010 1:59 pm
by Kimmo
Nice work. How much are you asking?
Posted: Tue Sep 07, 2010 5:40 pm
by PAC_ET
Kimmo wrote:Nice work. How much are you asking?
cheers mate
$350 will cover it, i can make any style you want
cheers
Posted: Tue Sep 07, 2010 7:08 pm
by EXAMADNESS
Manifold looks awsome. nice work
Posted: Tue Sep 07, 2010 7:50 pm
by japcrap
how thick are the steam pipes are you using? im quite keen on your work man
Posted: Tue Sep 07, 2010 8:13 pm
by PAC_ET
japcrap wrote:how thick are the steam pipes are you using? im quite keen on your work man
hey jay, 3mm thick
Posted: Wed Sep 08, 2010 2:39 am
by Kimmo
PAC_ET wrote:Kimmo wrote:Nice work. How much are you asking?
cheers mate
$350 will cover it, i can make any style you want
cheers
I'm gonna bear that in mind. Mine cost $700, and it's shit.
...Just had a thought about a possible technique to get a smoother transition in the collector.
If you have an oxy, you could leave more than a quarter of the tube on the small end, then heat it up and bash it flatter so it still only goes through 90°, but at a larger diameter.
Then when you join the four of them, the taper would be shallower for a given length and this end would be larger. Also, the internal ribs formed by the meeting tubes wouldn't be as deep.
Just an idle notion... dunno if it's a good idea or not
Posted: Wed Sep 08, 2010 7:34 pm
by tassuperkart
Its not that critical M8.
Particularly on a turbo manifold. The diameter of that merged end is nothing more than what has to line up with the turbo flange.
Your never going to see more than one actual pulse traveling thru it at any one time so its never going to be any restriction anyway..
Its been well documented the gains to be had by actually necking the collector diameter down just beyond the merge and then opening it back out again to the finished collector diameter in atmo extractor systems.
The dimensions of the piping on a top end header system is a sum of the engine capacity, bore and stroke, the cam timing, port diameters, predicted max RPM and predicted torque peak, header pipe length and a host of other parameters.
The whole show is then varied again by projected EGT's.
Its a black art akin to designing a well running expansion chamber for a 2 stroke.
All the theory in the world will not guarantee a good result.
When the manifold is put under pressure, all that beautiful theory goes well out the window and remarkably high numbers can be had with a simple log style manifold. In fact very difficult to top even with a carefully designed and tuned extractor system.
L8r
E
Posted: Wed Sep 08, 2010 8:01 pm
by japcrap
hey Andrew would you consider making manifolds on other makes and models?
Posted: Thu Sep 16, 2010 2:10 am
by Kimmo
tassuperkart wrote:Its not that critical M8.
Your never going to see more than one actual pulse traveling thru it at any one time so its never going to be any restriction anyway..
/tardfase