With the new motor and gearbox installed, it's looking like time to replace the blown Monroe Gas shocks that my ET rolls around on.
I haven't been able to find anything definitive with a search, so I thought I might start this thread. I'm interested in some information regarding what parts will fit and work well.
Firstly, would anyone happen to know whether N13/N14 struts will bolt up? I'm sure that stock springs are too large in diameter and the bolt pattern on the strut top is different, but I am specifically asking about the length of the strut body and whether the spacing/size of the holes on the strut leg will bolt up? If they do, using GTIR coilovers or similar may be an option with a strut top modification / stock N12 strut tops swapped on, which would open up a few options.
Secondly, does anyone happen to know the part number of the Koni Special inserts which Callumgw used for the article on installing front strut inserts? I have found these: http://www.eshocks.com/bil_Ind.asp?VC=5 ... %20vehicle, but I am not sure that N13 inserts will fit in an N12 strut body.
Thirdly, are there any options regarding rear springs? King Low springs might be the go, but I think I may have seen someone get an adjustable platform to suit coilover springs to suit? Anyway, it would be great to know.
And finally, I just wanted to ask anyone who might know whether any of these parts will work?
Front Camber Bolts:
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... ink:top:en
http://www.ebay.com.au/itm/Mk1-Mk2-Esco ... uhb=1#shId
(I think that MK2 Escort rear shocks might fit an N12? Not sure about the valving though.)
Front Coilover Sleeve Kit 51mm:
http://www.otomoto.com.au/p/4116535/hsd ... -kit-.html
Sorry for such a long winded post! I'd greatly appreciate any helpful contributions here, and I'm sure it will help someone else out at some point as well.
N12Turbo.com lanyards are now available! Click here to visit the shop
Suspension Options? What parts will fit?
General chat related to anything N12.
1 post • Page 1 of 1
- Posts: 10
- Joined: Thu Sep 27, 2012 10:34 pm
1 post • Page 1 of 1