Best place to tune microtech in melb?

discopigg · Post by **discopigg** » Fri Mar 04, 2011 11:20 am

Hey all, i know this has been asked before, but all i could find by searching was a recommendation for maztech from a while back. Is there anyone else around that you guys would recommend for dynotuning my ET with microtech?
Cheers!

BennyET · Post by **BennyET** » Fri Mar 04, 2011 12:15 pm

http://www.autosource.com.au/car-dyno-tuning.php

discopigg · Post by **discopigg** » Fri Mar 04, 2011 12:18 pm

BennyET wrote:http://www.autosource.com.au/car-dyno-tuning.php

Thanks mate.

Would also appreciate anyone with personal experience with dealing with someone? Have heard some horror stories and would like to get it right first time if possible..

Damo · Post by **Damo** » Fri Mar 04, 2011 2:31 pm

If you are after just a tune, any dyno operator worth half a pinch of shit should be able to tune it, so go with someone who has a good reputation around the traps.
If you are after a fault finding dyno operator who will fix the bugger'd things, your choice will limited to someone who knows the microtech a little better than the average, so you will need to go to a Mtech specialist.

Damo

xr6eta · Post by **xr6eta** » Sat Mar 05, 2011 5:16 pm

Damo wrote:If you are after just a tune, any dyno operator worth half a pinch of shit should be able to tune it, so go with someone who has a good reputation around the traps.
If you are after a fault finding dyno operator who will fix the bugger'd things, your choice will limited to someone who knows the microtech a little better than the average, so you will need to go to a Mtech specialist.

Damo

You're lucky you got this advice from Damo, his usual advice is to get rid of the Microtech piece of shit and get something else. I know, he has spent countless hours on mine. His reward will be in the next couple of weeks when we pump it up to 20pnd boost.

BLUE ET · Post by **BLUE ET** » Sun Mar 06, 2011 5:41 pm

In Melbourne creatd motorsports are good they did a mates et, drove well

ET87 · Post by **ET87** » Tue Mar 08, 2011 10:04 am

efi dynamics in lilydale.. guys name is errol.. that guy is a freak.

Kimmo · Post by **Kimmo** » Tue Mar 08, 2011 6:36 pm

Named after a freak.

What a gun he was : )

ETONE · Post by **ETONE** » Tue Mar 08, 2011 8:33 pm

ACE WORKSHOP in clayton are awesome, highly recommended

www.aceworkshop.com.au

Tell Anthony Campbell told you to ring he will look after ya

discopigg · Post by **discopigg** » Thu Mar 10, 2011 10:44 am

Thanks for all the replies!

ET87 wrote:efi dynamics in lilydale.. guys name is errol.. that guy is a freak.

Is he good with microtechs? One of my mates dad is friends with him(been taking his r8 clubsport to him for a while now) and it's nice and close to me so would be good but going off damo's advice i was leaning towards maztech instead having heard that the guy is amazing with mtechs..

Post by **tassuperkart** » Thu Mar 10, 2011 6:33 pm

M8
Microtechs are so simple that it seems quite a few tuners have trouble with them.

What you are after is not a good MICROTECH tuner but simply a respected DYNO tuner. There are hundreds of them. ask around outside this forum.

That should be your question K?

L8r
E

ET87 · Post by **ET87** » Thu Mar 24, 2011 4:01 pm

That bloke errol will tune anything n everything.. i have seen sr20's to twin turbo vx ss, to 8 sec cars down the quater. If its a car he will tune it. i reckon he could tune a lawn mower to chirp 2nd he is that good..