N12 Turbo Forums

ill reconnect breather shit and see how i go, going to go through it all sunday night, pretty busy until then. If i cant figure it out ill just finish the microtech loom and drop it all in,

Hi guys, as some of you know ive recently haf the engine out of my car to replace a few bits and pieces, Now it back in, i cant get it to run, the only things ive changed whilst it was out was to the egi manifold, and the exhaust and a intercooler piping obviously. Ive been through and check the fue...

not yet, should be tonight..

I'm playing this all by guess work, does anyone no what the excess of vaccumm conectors are ontop of the throttle body

http://img219.imageshack.us/img219/5574/imag0326hx7.th.jpg http://img219.imageshack.us/images/thpix.gif http://img219.imageshack.us/img219/4331/imag0334mediumxh0.th.jpg http://img219.imageshack.us/images/thpix.gif http://img219.imageshack.us/img219/8086/imag0332mediumkj4.th.jpg http://img219.images...

top work,

Mmmm, may aswell, is it all exa's or just certain years

its laggy because, the pressure of the turbo coming onto boost causes the flap in the afm to open a heap quicker as if at wide open throttle at 5500rpm so it accordingly drops in equivelent fueling causeing it to run very rich. not rich enough that you'll notice anything different on light load but ...

1400 bux, fark, a exahust shop would charge like 400-600.

its the afm between turbo and tb. makes it to rich and bogs down hard, when i did it it was heaps laggier

pic of the new dump pipe i did up, got a new welder so if anybody is looking for some light fabrication work, eg cooler pipeing, exhaust, mufflers tacked on etc, let me know. 0439948022

Update, Engine and gear box seperated in june while the car was running causeing it to shake itself asleep in the middle of an intersection during peak hour, towed it home, didnt touch it, spent 6 weeks over seas, now ive finally got around to getting the engine out, replaced the rear turbo housing ...

ahhahahahahahahhahahahahahhahahaha



gold, almost felt sorry for you you poor bastard

check all the bolts that hold the gearbox to the engine are there, i had the same problem turned out to be top bolts missing

my chassis has done about 485k i changed the dash out at 450 and done about 35 since

heya guys, Heading home after work tonight sitting at an intersection about to take off, my car was vibrating quiete heavily and i realised the rear mount had obviosly come loose again and the car wouldnt get into gear, i jumped out of the car and tried to push it out of the intersection, about 30 s...