N12Turbo.com lanyards are now available! Click here to visit the shop
do these fit gtr injectorz
r32 gtr (rb26) uses low impedance top feed injectors
r32 gtst (rb20) uses high impedance top feed injectors
an upgrade for rb20's are the rx7 s 4-5 being from 480-550cc etc.
now these also fit into the rb30's which is a common upgrade.
being that rx7 injectors fit into the stock e15et fuel rail, and the rb30's which are quite similar.
then i would say yes, they will fit.
anyone else?
r32 gtst (rb20) uses high impedance top feed injectors
an upgrade for rb20's are the rx7 s 4-5 being from 480-550cc etc.
now these also fit into the rb30's which is a common upgrade.
being that rx7 injectors fit into the stock e15et fuel rail, and the rb30's which are quite similar.
then i would say yes, they will fit.
anyone else?
Last edited by shanec86 on Tue Nov 14, 2006 10:21 am, edited 1 time in total.
162.4kw - 588.8nm
http://www.cmsperformance.net/
http://www.cmsperformance.net/
i have also heard that Gtr injectors will fit. (cant be 100% though)shanec86 wrote:r32 gtr (rb26) uses low impedance top feed injectors
r32 gtst (rb20) uses high impedance top feed injectors
an upgrade for rb20's are the rx7 s 4-5 being from 480-550cc etc.
now these also fit into the rb30's which is a common upgrade.
being that rx7 injectors fit into the stock e15et fuel rail, and the rb30's which are quite similar.
then i would say yes, they will fit.
anyone else?
Mods: GT28R, Microtech lt10s, stg3 cam, double valve springs, vn intake to vl external pump, mapassi @ 50psi, 3inch dump to 2 1/2 system, vl throttle, NPC clutch, 160HP @ wheels on 12psi
"power to the peaceful" Michael Frantii
"power to the peaceful" Michael Frantii
looks like the rx 7 injectors i once, had, just remove the o ring and clamp down some efi hose on the end.nismo85et wrote:i'm fairly sure they would be ok, same shape as my fj's. except the tail there, is that an o-ring?
Mods: GT28R, Microtech lt10s, stg3 cam, double valve springs, vn intake to vl external pump, mapassi @ 50psi, 3inch dump to 2 1/2 system, vl throttle, NPC clutch, 160HP @ wheels on 12psi
"power to the peaceful" Michael Frantii
"power to the peaceful" Michael Frantii