N12Turbo.com lanyards are now available! Click here to visit the shop
The Renegade's N12 Turbos.
- The Renegade
- Administrator
- Posts: 3002
- Joined: Tue Jul 04, 2006 7:22 pm
- Location: Telegraph Point - N.S.W. Mid North Coast
The Renegade's N12 Turbos.
** If you try to see my pix and you can't get to my page, just try again later, coz I'm a cheapskate and I refuse to pay for more data transfer**
Just thought I should put up here that there are many more pix throughout this thread, so read on to see progress!!!
For those who don't know me, I'm The Renegade, I'm from a little town called Wauchope near Port Macquarie on the N.S.W. mid north coast. I've been involved with this group for, umm, a whole lot of years now.
So anyways, I've had a few N12's....
1st was this Exa:
Click Here
I haven't quite finished adding all of the large pix to this yet, mainly coz I'm a slack ass.
Then after a few turbo'd rotors I came back to the N12 Turbo scene with the intention of using this as my project: (this shell's sold BTW)
Click Here
But I've scrapped that to do this:
Click Here
All I have to do is finish the interior and drop the RRC engine in. And of course it doesn't have those wheels anymore either. This page is also far from complete by the way.
Just thought I should put up here that there are many more pix throughout this thread, so read on to see progress!!!
For those who don't know me, I'm The Renegade, I'm from a little town called Wauchope near Port Macquarie on the N.S.W. mid north coast. I've been involved with this group for, umm, a whole lot of years now.
So anyways, I've had a few N12's....
1st was this Exa:
Click Here
I haven't quite finished adding all of the large pix to this yet, mainly coz I'm a slack ass.
Then after a few turbo'd rotors I came back to the N12 Turbo scene with the intention of using this as my project: (this shell's sold BTW)
Click Here
But I've scrapped that to do this:
Click Here
All I have to do is finish the interior and drop the RRC engine in. And of course it doesn't have those wheels anymore either. This page is also far from complete by the way.
Last edited by The Renegade on Tue Oct 02, 2007 10:31 pm, edited 3 times in total.
--------------------
Trust no-one but yourself.
The beast:
http://forum.n12turbo.com/viewtopic.php?t=3982
=====================
Mid North Coast Member.
=====================
Trust no-one but yourself.
The beast:
http://forum.n12turbo.com/viewtopic.php?t=3982
=====================
Mid North Coast Member.
=====================
- The Renegade
- Administrator
- Posts: 3002
- Joined: Tue Jul 04, 2006 7:22 pm
- Location: Telegraph Point - N.S.W. Mid North Coast
- The Renegade
- Administrator
- Posts: 3002
- Joined: Tue Jul 04, 2006 7:22 pm
- Location: Telegraph Point - N.S.W. Mid North Coast
***** UPDATED *****
I've added some pix of the car from the other night after I gave it a rinse.
Still no engine, as you can tell by the height of the front.
I'll get some pix of the engine bay up soon.
My New Exa Page
I've added some pix of the car from the other night after I gave it a rinse.
Still no engine, as you can tell by the height of the front.
I'll get some pix of the engine bay up soon.
My New Exa Page
Last edited by The Renegade on Wed Sep 20, 2006 8:18 am, edited 1 time in total.
--------------------
Trust no-one but yourself.
The beast:
http://forum.n12turbo.com/viewtopic.php?t=3982
=====================
Mid North Coast Member.
=====================
Trust no-one but yourself.
The beast:
http://forum.n12turbo.com/viewtopic.php?t=3982
=====================
Mid North Coast Member.
=====================
- The Renegade
- Administrator
- Posts: 3002
- Joined: Tue Jul 04, 2006 7:22 pm
- Location: Telegraph Point - N.S.W. Mid North Coast
Thanx dude, I'm stinging to drive it!!!
LOL
*yawn* I don't know if we can wait that long dude.....angel wrote:..........ill wait till i finish cutting and polishing it.
LOL
--------------------
Trust no-one but yourself.
The beast:
http://forum.n12turbo.com/viewtopic.php?t=3982
=====================
Mid North Coast Member.
=====================
Trust no-one but yourself.
The beast:
http://forum.n12turbo.com/viewtopic.php?t=3982
=====================
Mid North Coast Member.
=====================
- jazza_1984
- Posts: 105
- Joined: Mon Aug 07, 2006 12:46 pm
- The Renegade
- Administrator
- Posts: 3002
- Joined: Tue Jul 04, 2006 7:22 pm
- Location: Telegraph Point - N.S.W. Mid North Coast
Thanx mate, if that's your ET in your Avatar, then it ain't too bad either!jazza_1984 wrote:gee thats a slick looking exa mate, i like
--------------------
Trust no-one but yourself.
The beast:
http://forum.n12turbo.com/viewtopic.php?t=3982
=====================
Mid North Coast Member.
=====================
Trust no-one but yourself.
The beast:
http://forum.n12turbo.com/viewtopic.php?t=3982
=====================
Mid North Coast Member.
=====================
- Paul Smith
- Posts: 575
- Joined: Thu Aug 03, 2006 4:55 pm
- Location: Brisbane
- jazza_1984
- Posts: 105
- Joined: Mon Aug 07, 2006 12:46 pm
dude $500 ur laughing!!!! wat a bargain...did u happen to buy that off ebay??The Renegade wrote:***** UPDATED *****
I've added some pix of the car from the other night after I gave it a rinse.
Still no engine, as you can tell by the height of the front.
I'll get some pix of the engine bay up soon.
My New Exa Page
- The Renegade
- Administrator
- Posts: 3002
- Joined: Tue Jul 04, 2006 7:22 pm
- Location: Telegraph Point - N.S.W. Mid North Coast
Yes I am !!!!!exanator wrote:dude $500 ur laughing!!!! wat a bargain...
Yes I did !!!!! Couldn't click the "Buy It Now" button quick enough.exanator wrote:...did u happen to buy that off ebay??
--------------------
Trust no-one but yourself.
The beast:
http://forum.n12turbo.com/viewtopic.php?t=3982
=====================
Mid North Coast Member.
=====================
Trust no-one but yourself.
The beast:
http://forum.n12turbo.com/viewtopic.php?t=3982
=====================
Mid North Coast Member.
=====================
- The Renegade
- Administrator
- Posts: 3002
- Joined: Tue Jul 04, 2006 7:22 pm
- Location: Telegraph Point - N.S.W. Mid North Coast
Well.........
I figured it was time for an update.
This coming week I'm on hols fom work (for the 1st time in years) so Pulsar-Man is coming down to visit and we're gonna hook in and get the old girl running again.
The List:
Get the RRC engine out of the ET.
Get the 3" Exhaust off the ET.
Put the Microtech & loom in the Exa.
Put the Exhaust under the Exa.
Drop the engine in.
After that, we just have to get it started. Worries me a touch coz the engine hasn't been started for about a year now. We'll sort it though.
Then after it running, I have to re-install the interior and all of my gadgets like:
alarm
central locks
digital tacho
multimedia centre
2 x 7" TFT screens & a 17" TFT screen
assorted stereo bitz
stacks of LED's for the wank factor
and if I find one a digital dash.
Shit, should've taken a freakin' year off work.........
Anyways, we're going to be taking lots of pix, mostli of Pulsar-Man's nipples, but some of the car too. And they'll all end up posted up here.
I figured it was time for an update.
This coming week I'm on hols fom work (for the 1st time in years) so Pulsar-Man is coming down to visit and we're gonna hook in and get the old girl running again.
The List:
Get the RRC engine out of the ET.
Get the 3" Exhaust off the ET.
Put the Microtech & loom in the Exa.
Put the Exhaust under the Exa.
Drop the engine in.
After that, we just have to get it started. Worries me a touch coz the engine hasn't been started for about a year now. We'll sort it though.
Then after it running, I have to re-install the interior and all of my gadgets like:
alarm
central locks
digital tacho
multimedia centre
2 x 7" TFT screens & a 17" TFT screen
assorted stereo bitz
stacks of LED's for the wank factor
and if I find one a digital dash.
Shit, should've taken a freakin' year off work.........
Anyways, we're going to be taking lots of pix, mostli of Pulsar-Man's nipples, but some of the car too. And they'll all end up posted up here.
--------------------
Trust no-one but yourself.
The beast:
http://forum.n12turbo.com/viewtopic.php?t=3982
=====================
Mid North Coast Member.
=====================
Trust no-one but yourself.
The beast:
http://forum.n12turbo.com/viewtopic.php?t=3982
=====================
Mid North Coast Member.
=====================