N12Turbo.com lanyards are now available! Click here to visit the shop

GtiR powered ET Pulsar

The place to introduce yourself, post photos and specs of your car.
Post Reply
24BID
Posts: 2
Joined: Tue Sep 15, 2009 8:53 pm
Location: Brisbane

GtiR powered ET Pulsar

Post by 24BID »

Hey ppl , just thought i'd share some info. I've had my et from about 1996, have done a lot of mods since then , started with the usual intercooler dump pipe etc and ran consitent 14.3s still using a T2 turbo . Then did the full rebuild bigger intercooler t25 ,ems computer , vl throttle but didn't get a chance to fully tune due to fuel problems ran 14.1 i reckon it would of ran a 13.6-13.8 fully tuned . Now i've had the sr20det since 2001 and due to funds and alot of bad luck with engines only ran it this year with my first run at 13.3@110mph still using the t28 with only 13psi, second run i blew the cv because of wheel tramp , i eventually fixed that and have run a 12.8 @112mph, it still has heaps to go need to sort out suspension and dial in some more boost and maybe some slicks we'll see ...........will post some pics soon if anyone is interested
User avatar
Kimmo
Posts: 2287
Joined: Thu Nov 02, 2006 8:40 am
Location: Footscray

Post by Kimmo »

Yeah, cool... make with the pix, man : )
skez
Posts: 114
Joined: Sun Oct 25, 2009 5:18 pm

Post by skez »

how much was involved with putting that engine in mate
User avatar
Kimmo
Posts: 2287
Joined: Thu Nov 02, 2006 8:40 am
Location: Footscray

Post by Kimmo »

Custom engine mounts and driveshafts at minimum, I guess...

Plus exhaust and maybe shifter linkage.

It's the driveshafts that'll cost ya...
User avatar
Ash
Administrator
Administrator
Posts: 3246
Joined: Thu Aug 03, 2006 7:17 am
Location: Wangaratta, Victoria, Australia

Post by Ash »

pic us up :wink:
24BID
Posts: 2
Joined: Tue Sep 15, 2009 8:53 pm
Location: Brisbane

Post by 24BID »

Yeh a lot was involved but when you look at it now it seems easy, i quess it always is when its done ..custom engine and gearbox mounts are a must , custom cvs, i used the gtir brakes and suspension , the linkages were modified, etc etc etc fitted the engine a while back now. Can't figure out how to post pics can someone show me please thanks :?[/url]
User avatar
n12sumfin
Posts: 354
Joined: Sun Aug 30, 2009 6:29 pm
Location: NeWy

Post by n12sumfin »

mate you going to have to link it from external photo hosting like photobucket.com
User avatar
Ash
Administrator
Administrator
Posts: 3246
Joined: Thu Aug 03, 2006 7:17 am
Location: Wangaratta, Victoria, Australia

Post by Ash »

24BID wrote:Can't figure out how to post pics can someone show me please thanks :?
here you go man.

http://forum.n12turbo.com/viewtopic.php?t=515

just read that and you'll be an expert in no time :wink:
User avatar
The Renegade
Administrator
Administrator
Posts: 3002
Joined: Tue Jul 04, 2006 7:22 pm
Location: Telegraph Point - N.S.W. Mid North Coast

Post by The Renegade »

If you're still having probswith pix, e-mail them to me and I'll stick them up for ya.

renegade@n12turbo.com
--------------------
Trust no-one but yourself.

The beast:
http://forum.n12turbo.com/viewtopic.php?t=3982
=====================
Mid North Coast Member. :twisted:
=====================
User avatar
EXAMADNESS
Posts: 530
Joined: Thu Oct 15, 2009 6:37 am
Location: South Africa

PICS

Post by EXAMADNESS »

Any luck with the pic posting?
Mazda FE powered 2.0 16v N12 exa : http://forum.n12turbo.com/viewtopic.php?t=6592
Mazda 2.5 v6 KLDE into Nissan Exa "project" : http://forum.n12turbo.com/viewtopic.php?t=7442
Post Reply