N12Turbo.com lanyards are now available! Click here to visit the shop

Damo's ET

The place to introduce yourself, post photos and specs of your car.
User avatar
Damo
Posts: 1482
Joined: Tue Aug 08, 2006 11:46 pm
Location: Canberra

Post by Damo »

Yea, I remember the same GA conversation coming up a couple of times before also. The most thorough one from memory had someone comparing head gaskets (which I still have the pictures of) but I don't know if there was a actual GA head to match the E15 gasket to. This time I have the head in hand to match with the block, have a bit of and idea which galleries and returns I need to either get welded up or piped externally, and am not fussed about trying to convert the cog sprockets to cam sprockets (which I think was the ultimate downfall of the previous 'attempts'). We all crave a simple RB30 fashion bolt on, but that aint gonna happen.
A complete powertrain swap would end up being the best for reliability and possibly time consumption, but I don't have the luxury of having a complete QG donk and tranny. Besides, I'm a stubborn bastard who wants a E15DET badge on the back of the testicle!


Damo
Do humanity a favor, use your brain and fight the forces of WOO WOO!


http://www.youtube.com/watch?v=G1mrbxhWU5Y
User avatar
zoomzoom
Posts: 268
Joined: Fri Apr 29, 2011 5:54 pm
Location: Gympie QLD

Post by zoomzoom »

got love this bloke hats off damo for having a go mate





zoomzoom
tits'n' wheels gotta love'em
User avatar
Damo
Posts: 1482
Joined: Tue Aug 08, 2006 11:46 pm
Location: Canberra

Post by Damo »

Small update with the QG to E comparo,
The QG has the exact same head bolt holes, so in essence, the QG head will "Bolt" onto the E series block, without taking a look at the galleries or oil feeds.
So, first hurdle overcome. The head physically WILL bolt to the block! YAY.



Damo
Do humanity a favor, use your brain and fight the forces of WOO WOO!


http://www.youtube.com/watch?v=G1mrbxhWU5Y
User avatar
The Renegade
Administrator
Administrator
Posts: 3002
Joined: Tue Jul 04, 2006 7:22 pm
Location: Telegraph Point - N.S.W. Mid North Coast

Post by The Renegade »

Fuck me.
This could work.
You shouold be nominated for ..... some type of award.
--------------------
Trust no-one but yourself.

The beast:
http://forum.n12turbo.com/viewtopic.php?t=3982
=====================
Mid North Coast Member. :twisted:
=====================
User avatar
Damo
Posts: 1482
Joined: Tue Aug 08, 2006 11:46 pm
Location: Canberra

Post by Damo »

Did some playing at the olds yesterday.

I bolted the head to the block, there is a slight miss match of the bolt holes to the tune of probably .5mm across the width of the head. I am able to get the 4 outer bolts in, which causes the inboard 6 to just miss, or working from the middle, am able to get all 6 inboard ones in, then by giving the head a wiggle I can get 2 of the outer bolts on one side to take. So either way, I will need to hone the bolting holes a smidge. As can be seen from the pics, the centering of the head will be crucial, as it looks as though the inlet valves past very close to the bore on cyl#1 and exhaust on cyl#4.
I have resigned to the fact that I won't be able to get any factory Nissan sprockets to do the job. The original plan was to try two E15 cam sprockets, but there is not enough between the cams or room in the casing to mount them. Even two jack pump sprockets are too big! So I had a search online and found a mob who do sprockets for machinery. I am able to get 13 tooth 3/8 square belt 3/4 or 1" wide with the corresponding 2 x 26 tooth 3/8 blah blah blah for less than $100. Then i would need to source a belt which fits.
Quite a few oil passages and water galleries will need to be blocked off and re-drilled, but damn its good to see that head on the E series block!

Image
Image
Image
Image
Image
Image
Image
Image

Damo
Do humanity a favor, use your brain and fight the forces of WOO WOO!


http://www.youtube.com/watch?v=G1mrbxhWU5Y
User avatar
TurboZ.Dude
Posts: 1360
Joined: Wed Nov 22, 2006 4:25 pm
Location: Närpes, Finland
Contact:

Post by TurboZ.Dude »

:shock: :D :D :D
Awesome, I like this! I hope you are successful in creating this monstrosity! 8)
My N12:
http://forum.n12turbo.com/viewtopic.php?t=4926,
http://www.zxoc.co.uk/forum/topic.asp?TOPIC_ID=6345
http://forums.mightycarmods.com/showthr ... Pulsar-N12
Image
in all honesty dude these cars are shit but they have so much character, are fun and go fairly well when running right. we still play around with these things because they are a fun addictive little shitbox! :D - Ash
User avatar
JETETT
Posts: 357
Joined: Sun Aug 27, 2006 11:59 am
Location: Wollongong

Post by JETETT »

Hey mate nice going. Just a thought about going the next size up thickness in head bolts possibly head studs, which would mean re-drilling and tapping the block and drilling the head may put the bolt holes spot on
Image
User avatar
Damo
Posts: 1482
Joined: Tue Aug 08, 2006 11:46 pm
Location: Canberra

For sale (or free to Glen if he wants it).

Post by Damo »

For sale:

http://www.gumtree.com.au/s-ad/ngunnawa ... 1023312119
$4k

Take it Ren, you know you want too.

Whoops! Fixed.
Last edited by Damo on Thu Jul 11, 2013 6:36 am, edited 1 time in total.
Do humanity a favor, use your brain and fight the forces of WOO WOO!


http://www.youtube.com/watch?v=G1mrbxhWU5Y
User avatar
tassuperkart
Administrator
Administrator
Posts: 5578
Joined: Wed Jul 05, 2006 8:39 pm
Location: Southern Tasmania
Contact:

Post by tassuperkart »

That URL is no Good Damo. Link directly to the ad.

oracle
Forcd4 wrote:Oh fuk no dude it's you a again, the oracle.
User avatar
amraks
Posts: 210
Joined: Wed Feb 18, 2009 1:02 pm
Location: Burnie
Contact:

Post by amraks »

here E

http://www.gumtree.com.au/s-ad/ngunnawa ... 1023312119

quick tip when this happens again search for the adid on the gumtree main page.
Amraks
User avatar
tassuperkart
Administrator
Administrator
Posts: 5578
Joined: Wed Jul 05, 2006 8:39 pm
Location: Southern Tasmania
Contact:

Post by tassuperkart »

Cheers M8
Oracle
Forcd4 wrote:Oh fuk no dude it's you a again, the oracle.
User avatar
tassuperkart
Administrator
Administrator
Posts: 5578
Joined: Wed Jul 05, 2006 8:39 pm
Location: Southern Tasmania
Contact:

Post by tassuperkart »

Going to be a sad day if/when Damo gets out of it.......arrrgh!

Oracle
Forcd4 wrote:Oh fuk no dude it's you a again, the oracle.
User avatar
Damo
Posts: 1482
Joined: Tue Aug 08, 2006 11:46 pm
Location: Canberra

Post by Damo »

The car will go, I will stay to annoy you all. :D Besides, when Glen takes it ,it will remain in the N12 family.


Damo
Do humanity a favor, use your brain and fight the forces of WOO WOO!


http://www.youtube.com/watch?v=G1mrbxhWU5Y
User avatar
tassuperkart
Administrator
Administrator
Posts: 5578
Joined: Wed Jul 05, 2006 8:39 pm
Location: Southern Tasmania
Contact:

Post by tassuperkart »

Ahhhhhhhhhhhhhhhhhhhh..................... Nooooooooooooooooow I get it!!!!!!!
Hawhawhaw!!!!! hell hurt himself!!!!

Oracle
Forcd4 wrote:Oh fuk no dude it's you a again, the oracle.
Post Reply