N12Turbo.com lanyards are now available! Click here to visit the shop
Sohcturbs ET E15et Build
- photoglossy
- Posts: 2135
- Joined: Wed Aug 02, 2006 10:23 pm
- Location: Auckland, NZ
- Contact:
G'day all,
Took the car back to the dyno today and was crapping myself about over heating. Good news, solid coolant temps and fans controlling it.
So we gave it a nudge this time and all I now need to do is get a cert and wof.
Will post up the dyno graph, however figues are 195 FWKW at 6,200 rpm, Close to 550 NM torque. Did this on 98 pump gas and 20 psi, was still responding well to increases in boost pressure, however decided to be happy with what I had at this stage.
Time to get a WOF and see what it's like on the street.. I'd say interesting would be an appropriate word.
Took the car back to the dyno today and was crapping myself about over heating. Good news, solid coolant temps and fans controlling it.
So we gave it a nudge this time and all I now need to do is get a cert and wof.
Will post up the dyno graph, however figues are 195 FWKW at 6,200 rpm, Close to 550 NM torque. Did this on 98 pump gas and 20 psi, was still responding well to increases in boost pressure, however decided to be happy with what I had at this stage.
Time to get a WOF and see what it's like on the street.. I'd say interesting would be an appropriate word.
goodluck with the traction! some decent torque to go with the power! did you video the dyno?!?!
Members Ride: http://forum.n12turbo.com/viewtopic.php?t=6786
85 ET, M/tech LT10X, T28, FMIC 2.5" Stainless Piping, 3" Intake, Dump n Zorst, JDM Inlet, CA18DET Injectors, Bosch 040, Bodykit, 17s
85 ET, M/tech LT10X, T28, FMIC 2.5" Stainless Piping, 3" Intake, Dump n Zorst, JDM Inlet, CA18DET Injectors, Bosch 040, Bodykit, 17s
- photoglossy
- Posts: 2135
- Joined: Wed Aug 02, 2006 10:23 pm
- Location: Auckland, NZ
- Contact:
- tassuperkart
- Administrator
- Posts: 5578
- Joined: Wed Jul 05, 2006 8:39 pm
- Location: Southern Tasmania
- Contact:
- TurboZ.Dude
- Posts: 1360
- Joined: Wed Nov 22, 2006 4:25 pm
- Location: Närpes, Finland
- Contact:
Nice!
My N12:
http://forum.n12turbo.com/viewtopic.php?t=4926,
http://www.zxoc.co.uk/forum/topic.asp?TOPIC_ID=6345
http://forums.mightycarmods.com/showthr ... Pulsar-N12
in all honesty dude these cars are shit but they have so much character, are fun and go fairly well when running right. we still play around with these things because they are a fun addictive little shitbox! - Ash
http://forum.n12turbo.com/viewtopic.php?t=4926,
http://www.zxoc.co.uk/forum/topic.asp?TOPIC_ID=6345
http://forums.mightycarmods.com/showthr ... Pulsar-N12
in all honesty dude these cars are shit but they have so much character, are fun and go fairly well when running right. we still play around with these things because they are a fun addictive little shitbox! - Ash
New Wheels
Hi guys, grabbed some new rims to try and put down the power.
A massive improvement over the stock bickies and looking a bit better too..
Went to powercruise over the weeked and will pop up a quick vid in due course. Cheers, Dan
A massive improvement over the stock bickies and looking a bit better too..
Went to powercruise over the weeked and will pop up a quick vid in due course. Cheers, Dan
- rubixcube101
- Posts: 94
- Joined: Wed Jun 13, 2012 12:31 pm
- Location: Perth