With the amount of interest in the Top 'Ten' list to be expanded and to get a bit of competition happening, the list is open for submission. If you have ran any times and have ALL the required details (as follows) then post away.
A word of warning: Anyone caught submitting a dodgy timeslip/ details will be banned from the Top Ten list INDEFINITELY.
A Legible timeslip is a must and a picture of your car at the track and it would be a bonus if the competitors number is visual.
Cut and paste the following template and fill in the details...
Well, i need to go through my crap and find my timeslip now :-s
Heres my vid in the mean time
Very crap time for what i know the car is capable of
Even really crap considering its current setup but i DID have some pretty major dramas that night :-s so i spose its ok for a first kinda "half decent time" but still disappointing in my eyes
I wont be happy till i see a low 12
Wes
Posted: Wed Jan 31, 2007 8:52 pm
by raddavey
raddavey's missus White 86 ET Pulsar
1320FT TIME: 14.852
Terminal Speed: 95.64mph
60ft: 2.621
State/ Country: WA, Australia
CAR: 86 ET Pulsar
DRIVER: Tia
TYRES: 185 Street
DATE: 15/11/06
ENGINE C/R:stock
BLOCK : stock
HEAD: light port polish
TURBO : t25g
BOOST : 9psi
ECU: EMS
FUEL:98 octane
INTAKE MANIFOLD: jap spec
EXHAUST & MANIFOLD: hi mount to 2.5''
OTHER :fmic
next attempt will involve a engine build bb turbo injectors and some better rubber
(wanlis just dont cut it)
***UPDATED***
Posted: Mon Mar 19, 2007 11:15 am
by BennyET
1320FT TIME: 14.951 @ 96.24 mph
State/Country: QLD
CAR: 85 ET
DRIVER: Ben
TYRES: 185/65R14
DATE: 17/3/07
The following details may come useful aswell:
ENGINE C/R: stock
BLOCK : stock
HEAD: stock
TURBO : T25
BOOST : 15psi
ECU: LT8s
FUEL: BP 98 octane
INTAKE MANIFOLD: Jap spec
EXHAUST & MANIFOLD: Stock low mount to 2.5'' mandrel no cat
OTHER : 600x300x76 FMIC, FJ20ET injectors
Promise to drive it harder next time
***UPDATED***
Posted: Mon Mar 19, 2007 5:48 pm
by thepurplepulsar
Tia, Ben and Brendan have all been added.
Wes did you end up finding your timeslip?
How's about you Raddavey? Oh and can you get Tia's 660ft time and mph for me.
Is there anyone else that wants to submit a timeslip?
Posted: Mon Mar 19, 2007 5:55 pm
by raddavey
I can't find my timeslip but i'll get tia's info for you tonight.
Edit:
660' = 9.766
600' Speed = 123.86kmph
1000' = 12.511
Track Temp = 32.2C
Humidity = 80% (so not the best conditions)
info.
stock engine
stock block
stock head
T25 turbo
10 psi boost
stock ecu
98 octane fuel
hi mount manifold to 2.5'' exhaust,cat to 5 '' cannon
other mods are
FMIC,b.o.v, external & internal VL turbo fuel pump
future plans: dual stage boost control, get car tuned,new injectors
its nothing special,but ok for my 1st go down the 1/4
theres always room for improvement
Posted: Mon Apr 02, 2007 6:43 pm
by thepurplepulsar
I've put you up on the list rattie, good on ya for having a go.
Davey, that's a bugger you can't find your timeslip... I finished off Tia's details though.
Posted: Mon Apr 02, 2007 9:32 pm
by raddavey
Yeah it's somewhere around pretty sure it isn't thrown out but it doesn't matter cos i will replace it with a quicker time this year anyway.
Posted: Tue Apr 03, 2007 6:04 am
by photoglossy
Should add my old time of 18.021 with RRC E15ET with turbo removed... Just a low compression E15E motor really
Posted: Tue Apr 24, 2007 5:48 pm
by JETETT
Tony Jovanovski's PULSAR ET
1320FT Time: 11.749
State/Country: Western sydney int'l dragway/NSW
Car: Nissan Pulsar ET
Driver: Tony Jovanoski
Tyres: Street tyres
Date/time: 31st may 2006 - 9:46pm
ENGINE C/R: E15ET
BLOCK : Rebuilt with standard components
HEAD: Rebuilt with standard components
TURBO : Of T28 origon
BOOST : N/A
ECU: N/A
FUEL: elf fuel
INTAKE MANIFOLD: Sandard with custom plenium
EXHAUST & MANIFOLD: Standard
OTHER :
Tony says this time slip is nothing compared to what he'll get next time he
takes the car to the track with a new gearbox fitted with an LSD he is hopeing for an even faster time
Posted: Tue Apr 24, 2007 9:35 pm
by thepurplepulsar
Tony has been put on the list now, good on ya JETETT. I haven't put his car pic up yet, I might have a look at doing that another night... I'm not much of a nerd so the updating takes me forever haha.
Posted: Tue Apr 24, 2007 9:56 pm
by missET
Street tyres?? Or are they drag radials? If they are that puts it in the top 10 australian fwd street record.
but i'll get tia's info for you tonight.
Just a low compression E15E motor really