N12 Pulsar - Front Adjustable Coilover Suspension

Moderator: shanec86

User avatar
Rohan 84ET
Posts: 1429
Joined: Thu Feb 08, 2007 9:51 pm
Location: Adelaide, South Australia

Post by Rohan 84ET » Mon May 21, 2007 8:37 pm

shane when these run out . .will you be able to get more made up?

i am definitely interested in these . . .maybe much sooner than i thought . . . with the 4kg/mm like ya said . . . . and also wondering how much it would be in total with the rear springs and shocks like cherryturbojames asked about.
the "lowered and uprated rears so it is nice and stiff and shorter shocks to match"

with all this sent to SA . . . could i get a rough price?

User avatar
shanec86
Administrator
Administrator
Posts: 1454
Joined: Mon Jul 03, 2006 8:00 pm
Location: Melbourne
Contact:

Post by shanec86 » Tue May 22, 2007 12:17 am

I wont be getting any more made up. what i have left. that is IT :)

unfortunatly i can no longer supply other spring rates as i have sold all the spares i have. and is not a cost worthy exercise to get more. They can still be sourced in australia as replacements from pretty much any other coilover/suspension specialists.

you have PM

User avatar
Rohan 84ET
Posts: 1429
Joined: Thu Feb 08, 2007 9:51 pm
Location: Adelaide, South Australia

Post by Rohan 84ET » Tue May 22, 2007 12:30 am

cheers m8. thanx alot. ;)

User avatar
etking
Posts: 1199
Joined: Mon Aug 07, 2006 12:42 pm
Location: Hobart, Tas

Post by etking » Tue May 22, 2007 3:33 pm

how many are left? :S
Members Ride: http://forum.n12turbo.com/viewtopic.php?t=6786
85 ET, M/tech LT10X, T28, FMIC 2.5" Stainless Piping, 3" Intake, Dump n Zorst, JDM Inlet, CA18DET Injectors, Bosch 040, Bodykit, 17s

User avatar
jazza_1984
Posts: 105
Joined: Mon Aug 07, 2006 12:46 pm

Post by jazza_1984 » Tue May 22, 2007 9:02 pm

If there are only a few sets left, then i will lay down some cash and get a set. Not sure if i could have the full 750 for about 6 weeks, but i would be able to pay 400 or so next week. Perhaps lay down an order for front brakes, and rears as well if they go ahead.

User avatar
etking
Posts: 1199
Joined: Mon Aug 07, 2006 12:42 pm
Location: Hobart, Tas

Post by etking » Wed May 23, 2007 2:29 pm

i put dibs on a set too, same as my mate jazza!!!!
Members Ride: http://forum.n12turbo.com/viewtopic.php?t=6786
85 ET, M/tech LT10X, T28, FMIC 2.5" Stainless Piping, 3" Intake, Dump n Zorst, JDM Inlet, CA18DET Injectors, Bosch 040, Bodykit, 17s

User avatar
shanec86
Administrator
Administrator
Posts: 1454
Joined: Mon Jul 03, 2006 8:00 pm
Location: Melbourne
Contact:

Post by shanec86 » Sun May 27, 2007 11:05 pm

8 Pairs of Coilovers Left guys.

First in best dressed. You wont be seeing these ever again.

User avatar
etking
Posts: 1199
Joined: Mon Aug 07, 2006 12:42 pm
Location: Hobart, Tas

Post by etking » Mon May 28, 2007 7:18 pm

please let me know if these get down to 4 or something as i really want them but microtech is going in in 4 weeks so theres 2g just there, but if they are going to run out i can get some cash somehow cause i need your stuff lol
Members Ride: http://forum.n12turbo.com/viewtopic.php?t=6786
85 ET, M/tech LT10X, T28, FMIC 2.5" Stainless Piping, 3" Intake, Dump n Zorst, JDM Inlet, CA18DET Injectors, Bosch 040, Bodykit, 17s

User avatar
Rohan 84ET
Posts: 1429
Joined: Thu Feb 08, 2007 9:51 pm
Location: Adelaide, South Australia

Post by Rohan 84ET » Wed Jul 04, 2007 5:36 pm

sorry to be a bitch shane, but how many sets are left? i am thinking these are gonna be a must in the future, so gonna put some pennys away for a set now.

cheers m8.
ET coming back from the dead.

SAVE ME JEBAS!

User avatar
etking
Posts: 1199
Joined: Mon Aug 07, 2006 12:42 pm
Location: Hobart, Tas

Post by etking » Wed Jul 04, 2007 10:15 pm

mine will be paid for next wednesday :D cannot wait :D also the brakes ... mmmmm ... droooools!!!
Members Ride: http://forum.n12turbo.com/viewtopic.php?t=6786
85 ET, M/tech LT10X, T28, FMIC 2.5" Stainless Piping, 3" Intake, Dump n Zorst, JDM Inlet, CA18DET Injectors, Bosch 040, Bodykit, 17s

User avatar
shanec86
Administrator
Administrator
Posts: 1454
Joined: Mon Jul 03, 2006 8:00 pm
Location: Melbourne
Contact:

Post by shanec86 » Thu Jul 05, 2007 12:30 am

Rohan, i think theres about 4 to 6 sets left.

etking, no worries :)

User avatar
Ben Hewitson
Posts: 1136
Joined: Tue Aug 08, 2006 9:19 am
Location: Adelaide, SA.
Contact:

Post by Ben Hewitson » Thu Jul 05, 2007 8:14 am

shane... i...need....the....adjuster.... ;)
Uncie-G wrote: As for the drift steering wheel, if you use this combined with earthing kit at the same time the overall road feel and torque steer gets reduced.

User avatar
Ash
Administrator
Administrator
Posts: 3246
Joined: Thu Aug 03, 2006 7:17 am
Location: Wangaratta, Victoria, Australia

Post by Ash » Thu Jul 05, 2007 5:20 pm

Ben Hewitson wrote:shane... i...need....the....adjuster.... ;)
you've been needing that for a bloody long time now! it can't be that hard to send 1! :?

User avatar
shanec86
Administrator
Administrator
Posts: 1454
Joined: Mon Jul 03, 2006 8:00 pm
Location: Melbourne
Contact:

Post by shanec86 » Thu Jul 05, 2007 11:36 pm

I am trying to source a replacement. Other wise i will have to remove one from another complete set.
Thats what happens when you use pliers on it :wink:

User avatar
Ben Hewitson
Posts: 1136
Joined: Tue Aug 08, 2006 9:19 am
Location: Adelaide, SA.
Contact:

Post by Ben Hewitson » Sat Jul 07, 2007 11:51 am

wish it was me. but if it hadn't seized the shock i wouldn't have had to use them. broke 2 Flintware alen keys getting it freed up after the adjuster broke... didn't want to mention that incase no-one wanted to buy them off you after mine locked up after 2 weeks...

if you cant find one, send it back and i'll insert my spare allen key into it and machine off the circlip area on the lathe. i really need it...

cheers.
Uncie-G wrote: As for the drift steering wheel, if you use this combined with earthing kit at the same time the overall road feel and torque steer gets reduced.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest