Breakthrough

Post your articles here for review
Post Reply
User avatar
Kimmo
Posts: 2285
Joined: Thu Nov 02, 2006 8:40 am
Location: Footscray

Breakthrough

Post by Kimmo » Wed Nov 28, 2007 8:03 pm

I'm posting this here so it doesn't get buried... I saw this on The New Inventors earlier this year; tonight Glenn Thompson just missed out on winning The New Inventors grand final. I reckon he deserved the win.

He was saying that they're concentrating on the industrial market before moving on to automotive applications; if you want em in the meantime, it might just be possible...
Apparently they're good for up to 32° so far.

Thompson Couplings Ltd
Image

The Thompson Coupling is certainly amongst the most important inventions since the advent of the internal combustion engine. It is the world's first and only, practical, constant velocity joint to have no load bearing sliding surfaces.

The Thompson Coupling is the world's first and only Constant Velocity Joint which:
  • Has all loads carried by roller bearings
  • Has no sliding or skidding surfaces whatsoever
  • Can tolerate axial and radial loads without degradation
  • Has no torque limitation, constructed to any torque level
  • Does not require special lubrication
  • Does not require a dust boot
  • No wearing components except replaceable bearings and trunnions
  • Is suitable for automotive tail or propeller shaft applications
  • Is a true Constant Velocity Coupling as distinct from a cv joint
In mass production each and every component of the Thompson Coupling can be produced by forging and/or casting with the only further requirement being to drill and machine the bearing journals, holes and circlip grooves. No dedicated machinery is required and there is no complex machining at all. Bearings for most applications are stock and assembly is very simple. For one-off project applications, manufacture is simple and within the capability of any machine shop. No specialist machinery is required as is the case with Rzeppa type joints. A Thompson Coupling can be disassembled with a pair of circlip pliers and the bearings replaced with a minimum of expertise and downtime. The Thompson Coupling is very compact and may be over-engineered to increase reliability without adding substantially to bulk and weight. It is obvious that use of the Thompson Coupling in lieu of Cardan Joints (traditional unis) will eliminate a large source of vibration in many machines and automotive applications.
Image

AWESOME! Free power! Not to mention forgetting all about bloody CV boots... win!

More info
Last edited by Kimmo on Thu Nov 29, 2007 4:49 am, edited 1 time in total.

User avatar
thepurplepulsar
Administrator
Administrator
Posts: 568
Joined: Tue Jul 04, 2006 5:48 pm
Location: Whistler, Canada.

Post by thepurplepulsar » Wed Nov 28, 2007 8:57 pm

Nice way to ruin the ending of the movie haha, here in Brissy the show is about to announce the winner shortly.
Number 5 on the Top Ten List - 12.39 @ 110mph

My Car

User avatar
dexi_styles
Posts: 1227
Joined: Fri Aug 25, 2006 1:49 pm
Location: South Brisbane

cool invention

Post by dexi_styles » Sun Apr 13, 2008 11:54 pm

we should somehow get incontact with this person and some how get them to make a prototype for our n12s.... but hey could you imagine the burn outs you can do around a corner???? no vibrations.... no CV bunce. smooth smokin!!!

User avatar
Kimmo
Posts: 2285
Joined: Thu Nov 02, 2006 8:40 am
Location: Footscray

Post by Kimmo » Mon Apr 14, 2008 10:19 pm

Yeah, you'd be able to get away with this...

(Note the funny side-to side movement after the burnout caused by the jammed-up utterly fuxxored CVs...)

dr3amer
Posts: 1
Joined: Mon Nov 08, 2010 5:11 pm
Location: adelaide

Post by dr3amer » Sat Dec 04, 2010 4:15 pm

WOW I NEED A SET FOR MYN...

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest