Posted: Sun Jun 10, 2007 8:22 pm
the wire i used from the motor to the boot (+) was thicker than the stock cable
N12 Turbo Forums
New Track time list section!
https://forum.n12turbo.com/
Battery to boot relocation for N12 EXA and ET.
Page 3 of 6
Posted: Sun Jun 10, 2007 8:43 pm
How much thicker? cos it's changed from a 2 foot run, to a 3 or 4 meter run.
Posted: Mon Jun 11, 2007 10:58 am
ill take photos it might make it easier....also joOf came over yesterday and had a look and it looks like the earth isnt enough so im gonna have a go 2day and see how it goes
Posted: Mon Jun 11, 2007 11:01 am
yeh i was thinking it was your ground, make sure you sand the paint back wherever you ground it..
Posted: Mon Jun 11, 2007 2:53 pm
ok i put the battery back were it was suppose to be....tryed everything and nothing worked...oww well
Posted: Tue Jun 12, 2007 8:17 am
make sure you check all your fusable links are intact.
Posted: Tue Jun 12, 2007 8:59 am
hey i just checked my relocation, (it was done before by a previous owner)
and the fat red wire runs through a little hole in the firewall just behind that engine mount shockie, but i didn't notice a fuse on the wire at all, and theres no grommet where it passes through the metal hole, so if it cut down the wire enuf, theres an arc welder right there, what kinda fuse should i be looking at installing, and what kinda places would sell em?
and the fat red wire runs through a little hole in the firewall just behind that engine mount shockie, but i didn't notice a fuse on the wire at all, and theres no grommet where it passes through the metal hole, so if it cut down the wire enuf, theres an arc welder right there, what kinda fuse should i be looking at installing, and what kinda places would sell em?
Posted: Tue Jun 12, 2007 12:39 pm
HOLY SHIT!
You will find the fuses and holders at Supercheap, Autobarn, anywhere really.
I have pix somewhere of the damage in my car from when the previous owner had it and it caught fire from exactly this.
Do it as soon as you can dude. I'd hate to see you get your car finished and then have it go up in smoke.
You will find the fuses and holders at Supercheap, Autobarn, anywhere really.
I have pix somewhere of the damage in my car from when the previous owner had it and it caught fire from exactly this.
Do it as soon as you can dude. I'd hate to see you get your car finished and then have it go up in smoke.
Posted: Tue Jun 12, 2007 11:01 pm
so the fuses that people use on their speaker wiring and shit is all good?
i thought it would have to be a stringer fuse?
anything exact someone can recommend me?
yeah, will try to do it first up mate, i would hate to see it go up in flames too!
i thought it would have to be a stringer fuse?
anything exact someone can recommend me?
yeah, will try to do it first up mate, i would hate to see it go up in flames too!
Posted: Tue Jun 12, 2007 11:10 pm
Something around 200A should be more than enough, Stinger should be OK, I can't for the life of me remember the brand of the ones I sell......
Posted: Tue Jun 12, 2007 11:19 pm
would the ones you sell be able to be sent via post? i want a fully custom imported fuse from renegade!
he he.
he he.
Posted: Tue Jun 12, 2007 11:23 pm
heh heh heh, Fully SCHICK Bro.
Yeah, I'm mega busy ATM but I'll check out what stock I've got in the garage and if there's one there I'll let ya know.
Yeah, I'm mega busy ATM but I'll check out what stock I've got in the garage and if there's one there I'll let ya know.
Posted: Tue Jun 12, 2007 11:24 pm
haha, awesome! i love getting parcels in the mail 
i have bonnet vents to be delivered tomoro
i have bonnet vents to be delivered tomoro
Posted: Wed Jun 13, 2007 2:09 pm
i run a 120A cercuit breaker and no probs. my brothers car ran the same setup for years no probs.
Posted: Wed Aug 15, 2007 5:26 pm
Whats PE Tube. Could you get away with venting the battery by using a sealed one or do you still need to vent it