Page 1 of 1

Info needed/ Help needed

Posted: Sat Apr 29, 2017 6:29 am
by mathysvdm
hi all. I'm new to the group and am hoping that some one can help me.
im driving a 1985 1.5 exa Turbo that i bought a few months ago. It had a blow head gasket but i have redone the head with all new gaskets and ect. I am still batling with oil coming out of this hole in between the outlet port 2&3. can any one tell me what this hole is for and if there is suppose to be oil in it???
please any help would be appreciated. I do not know any more.
I've attached an image of the cylinder head marking the hole.

Re: Info needed/ Help needed

Posted: Sun Apr 30, 2017 3:00 pm
by KiloooNL
Hey mathysvdm,
I'm not sure if you attached the photo properly, if you attached it via the attachment tab, after it is uploaded click "Place In-line" to place it in your message.

I'm not exactly sure what you mean by outlet port 2 & 3? Are you referring to the exhaust outlet ports on the head/manifold?
Let us know

Cheers

Info needed/ Help needed

Posted: Thu Mar 15, 2018 7:26 pm
by mathysvdm
Hi. i need some more info.
I bought a complete new engine E15S but this one is the original turbo block.
the oil feed hole did not have any fitting in it for the oil line and I can not seem to find one by me for it.
Does any one know what the size is of the hole or the size of the fitting to go in this hole.
If I can get the size then I can phone places for it cause no one knows what size it should be.
E15 BLOCK.jpg
20180125_061538.jpg
20180125_061508.jpg