Ahh shit...I dunno m8.
I pulled all the little hosetails out, tapped the holes and wound in short bolts real tight to seal and then ground the heads off to make neater.
Off the top of my head I dont know which vac source the carbon cannister uses. Ill look at the wifeys stock setup and get back tomoz evening K.
E
N12Turbo.com lanyards are now available! Click here to visit the shop
egi manifold installation
- tassuperkart
- Administrator
- Posts: 5578
- Joined: Wed Jul 05, 2006 8:39 pm
- Location: Southern Tasmania
- Contact:
IIRC the small bore hose at the top of the carbon canister goes to the small pipe on the throttle body. It should be the one which opens inside the t/b just prior to the butterfly on the turbo side when the butterfly is closed, and on the engine side once the throttle is anything more than very slightly cracked open.
Damo
Damo
Do humanity a favor, use your brain and fight the forces of WOO WOO!
http://www.youtube.com/watch?v=G1mrbxhWU5Y
http://www.youtube.com/watch?v=G1mrbxhWU5Y
- tassuperkart
- Administrator
- Posts: 5578
- Joined: Wed Jul 05, 2006 8:39 pm
- Location: Southern Tasmania
- Contact: