Page 1 of 1
small intercooler
Posted: Sun Jul 22, 2012 2:45 am
by grunertee
Do someone know if there is small enough intercoolers in some car models which fit to the right side of the hood lock support rod of N12/b11 between front mask and radiator. It has been difficult to find a universal one that is suitable.
Posted: Sun Jul 22, 2012 5:46 pm
by baz
Rx7 have a nice small cooler than flow quite well
Posted: Sun Jul 22, 2012 6:52 pm
by poeticjustice88
the front mount small intercoolers that sr20/ca18 silvia/180sx/200sx' run could work. also come off of skylines, they are all intercooled with small coolers mounted underneath a headlight. check em out
http://www.eminenceimports.com/images/r33rc.jpg
Michael
Posted: Mon Jul 23, 2012 9:33 pm
by baz
Wouldnt run any stock import sidemounts..xr6 fmics are a nice little size
Posted: Mon Jul 23, 2012 10:43 pm
by Valentich
I would think! if I read this right,
that Nissan (Jap Imports) are not that common,
that is if you are in Finland. so, I would look at Golf/Audi...
I understand that a SAAB 9000 turbo has a good one,
I think a few people have used them as an upgrade....
I dont know if it would fit in, but worth a look.
Good luck
Posted: Thu Aug 30, 2012 1:19 am
by grunertee
This is a pic of "N12Turbo's" car from the forum:
Nice intercooler setup!
Does someone know the size/origin/manufacturer of this ic?
Posted: Thu Aug 30, 2012 3:55 pm
by BennyET
grunertee wrote:Does someone know the size/origin/manufacturer of this ic?
13bt s4/5 rx7
Posted: Sat Sep 08, 2012 6:03 pm
by tassuperkart
Nissan 300ZX smic's are very compact and do a reasopnable job up to about 1 bar of boost or so.
Oracle
Posted: Sat Sep 08, 2012 6:32 pm
by NIzmO
In Finland a Saab 900 (up to -93) intercooler should be easy to find, about as big as a s13 IC and can be found with plastic and aluminium sides.
Posted: Sat Sep 08, 2012 7:11 pm
by poeticjustice88
ebay, @120
Michael
Posted: Sun Sep 09, 2012 8:50 pm
by grunertee
NIzmO wrote:In Finland a Saab 900 (up to -93) intercooler should be easy to find, about as big as a s13 IC and can be found with plastic and aluminium sides.
Thx for info. You probably mean this:
http://robietech.com/fred/intercooler1.jpg
Posted: Tue Sep 11, 2012 8:55 pm
by dexi_styles
It's not just as simple as putting a s4 rx7 intercooler on the et. You need to modify one side as it is facing the rear of the car, when the other side is what you can see.
I have an already custom rx7 intercooler ready for this style application.
Happy to send overseas
Cheers,
Dex
Posted: Wed Sep 12, 2012 2:44 am
by grunertee
pm sent..
dexi_styles wrote:It's not just as simple as putting a s4 rx7 intercooler on the et. You need to modify one side as it is facing the rear of the car, when the other side is what you can see.
I have an already custom rx7 intercooler ready for this style application.
Happy to send overseas
Cheers,
Dex
Posted: Sun Sep 16, 2012 1:35 pm
by Ztealth
If you search for my old EXA on here (cbf'd atm) you'll see I had fitted a 300zx TT cooler (not sure if it was a left or right one but I'm sure can be figured out). Compact, cheap, minimal piping and not much stuffing around. Came on boost very quickly.
