N12Turbo.com lanyards are now available! Click here to visit the shop
why does my car keeping doing head gasket
why does my car keeping doing head gasket
just a quick question as the topic says my block as been bored out to 20tho have a t25 turbo and run 12psi with a intercooler and bigger injectors this problem happens about every 6 months
Warped head, blocked injector, wrong igniting timing.
Damo
Damo
Do humanity a favor, use your brain and fight the forces of WOO WOO!
http://www.youtube.com/watch?v=G1mrbxhWU5Y
http://www.youtube.com/watch?v=G1mrbxhWU5Y
zoom zoom last it was between 3&4 this time it was the same but before the ast time it was betwween 1&2..... damo the head is staight all the injectors r good the timing mite b out but i will check all of it & let u guys wat i find if u of any thing elese i need 2 do i will check that aswell thanks guys 4 your info
The head might be straight, but is the block?
Don't assume engine builders check it either. They cut costs or have 3 different operators doing one engine.
What do plugs look like? Is it running lean?
Does it blow after a hard run? Or after freeway run low load?
What is your ignition map like? If you are using a standard computer, then what is the base timing set at?
Darren.
Don't assume engine builders check it either. They cut costs or have 3 different operators doing one engine.
What do plugs look like? Is it running lean?
Does it blow after a hard run? Or after freeway run low load?
What is your ignition map like? If you are using a standard computer, then what is the base timing set at?
Darren.
Race it.
- tassuperkart
- Administrator
- Posts: 5578
- Joined: Wed Jul 05, 2006 8:39 pm
- Location: Southern Tasmania
- Contact: