Replacement Plugs for ECU

Post by **tassuperkart** » Sun Jul 08, 2012 7:51 pm

Getting mighty scientific here M8.
I can confidently predict the plugs to buy AND fit will be very exxie.

I used single computer mother board plugs with fly lead and just cut the offending plugs off the loom and spliced them into the stock loom.

Worked perfectly and cost a few dollars and about an hours of work.

L8r
Oracle

amraks · Post by **amraks** » Mon Jul 09, 2012 4:43 pm

You do know you can still buy a whole loom for 500 to 1000 dollars from nissan?

They still make them but how often does someone need that part not often so I would gather the price is for the once off in a blue moon work that had to be done.

I find that price pretty exe

So if you could buy a brand new plug that would fix your problems for 25 to 50 dollars would you?

Post by **tassuperkart** » Mon Jul 09, 2012 6:37 pm

Nope. I fixed mine for about 5 dollars and THAT is about what i value the oem system at.
Hint: there are only about 5 wires that are troublesome!!!
L8r
Oracle

amraks · Post by **amraks** » Mon Jul 09, 2012 7:02 pm

Alright I guess so is that the wires on the 20 pin of the 16 pin.

Well one day I guess they will be needed. I pitched some new plugs off a loom I had already just didn't realize it was in a better condition than the one in the car.

The one in the car had cracked and some of the connections where being held in via solder lol.

Post by **tassuperkart** » Mon Jul 09, 2012 8:54 pm

AFM wires. I cant remember the pins. theyll be in th wiring diagrammes.
L8r
Oracle

amraks · Post by **amraks** » Mon Jul 09, 2012 9:15 pm

I'll take a look might even put up a how to when I come to do it.