help me too

Post by **The Renegade** » Mon Sep 18, 2006 9:43 am

dexi_styles wrote:......... i screwed the dignostic screw on the ecu in ..........

What diagnostic screw?

daz · Post by **daz** » Mon Sep 18, 2006 12:38 pm

There's screws that hold the ECU in place... thats sorta diagnostic...

Ie if you unscrew the ECU (and unplug it) it doesn't work...

Post by **The Renegade** » Mon Sep 18, 2006 12:47 pm

crita_76 wrote:Problem solved. split hose into the turbo. still idling a bit rough but i will sort that out later. thanks for all your help guys.

Sweet as dude, ya gotta be happy with that!

dexi_styles · Post by **dexi_styles** » Wed Sep 20, 2006 1:28 am

in the manual it tells you that there is a little screw near the L.E.D's if you screw that in you can drive the vehicle at a certain rev/ kms and it will give you a info about how the car is running and any problems read the following
under E15ET ECU diagnostic procedures for problem

http://www.n12turbo.com/files/files.htm
or look here
http://www.n12turbo.com/files/E15ET_dia ... s-1of5.jpg

Post by **The Renegade** » Wed Sep 20, 2006 9:26 am

Thanx for that.

N12 Turbo Forums

help me too

Re: problem

dignostic screw