Distributor pickup?????

[SSS Turbo]

Guys i'm wanting to buy a management system... i dont know if it will work on my car. please help.

will it work. what is our dizzy pick up. 60 -2, 36-1 or 24-1

thanks i'm looking at buying this. Gotech MFI PRO Engine Control Unit


http://www.gotech.co.za/prodpro.htm

Please let me know if it will work.

thanks

[boosted]

Guys i'm wanting to buy a management system... i dont know if it will work on my car. please help.

will it work. what is our dizzy pick up. 60 -2, 36-1 or 24-1

thanks i'm looking at buying this. Gotech MFI PRO Engine Control Unit


http://www.gotech.co.za/prodpro.htm

Please let me know if it will work.

thanks

Hello,
it won't fit like plug and play cause all the magnetic rpm pick up-systems (60-2, 36-1,etc.) differ from our optical rpm pick up.
if you definately want to use this ecu, a customized trigger wheel and magnetic sensor has to be used (mounted on the crankshaft e.g.)

greets
martin

[tassuperkart]

Depends if its a magnetic reluctor pickup or a hall effect pickup which has the identical output waveform to an optical pickup.

However, the Nissan uses a 360-4 setup.

Id be contacting Go-Tech direct to see if their ECU's can come configured to our 360-4 optical (Hall) application.

Id be seriously surprised of they didnt.

L8tr
'E

[boosted]

Depends if its a magnetic reluctor pickup or a hall effect pickup which has the identical output waveform to an optical pickup.

But still our optical pickup is no missing tooth-principle like magnetic or hall systems.
Should be feasible with some logic-circuitry though...

greets
martin

[velardejose]

Hi
Have you checked microtech?
There is a lot of microtech data in this site
Peace

[tassuperkart]

But still our optical pickup is no missing tooth-principle like magnetic or hall systems.
greets
martin

Well, no "missing" tooth exactly but simply one enlarged slot in the 180 Deg trigger to /referencesequence the system.

Same horse. different jockey!!!

L8tr
E