General chat related to anything N12.
Rzeractor
Posts: 39 Joined: Sun Aug 20, 2006 1:11 pm
Location: Cacapoopoopeepeeshire [Melb]
Post
by Rzeractor » Sun Aug 20, 2006 5:29 pm
Last edited by
Rzeractor on Sun Aug 20, 2006 7:10 pm, edited 2 times in total.
Rzeractor
Panda_ET
Posts: 3835 Joined: Wed Aug 02, 2006 10:02 pm
Location: Launceston
Contact:
Post
by Panda_ET » Sun Aug 20, 2006 5:38 pm
would be saying T25 what are teh A/R on the front cover i would guess .48
Panda_ET
Rzeractor
Posts: 39 Joined: Sun Aug 20, 2006 1:11 pm
Location: Cacapoopoopeepeeshire [Melb]
Post
by Rzeractor » Sun Aug 20, 2006 5:44 pm
Couldn't get sort of a decent angle - actually it's quite dirty there, bit of grease over the years and such. Should of gave it a clean before taken fotos.
Rzeractor
Panda_ET
Posts: 3835 Joined: Wed Aug 02, 2006 10:02 pm
Location: Launceston
Contact:
Post
by Panda_ET » Sun Aug 20, 2006 5:52 pm
well i noticed it had a 3bolt flange on the comp outlet so its aint a t2 and not being able to see the inlet i would still say its a T25 off a CA18det
Panda_ET
Rzeractor
Posts: 39 Joined: Sun Aug 20, 2006 1:11 pm
Location: Cacapoopoopeepeeshire [Melb]
Post
by Rzeractor » Sun Aug 20, 2006 6:11 pm
Maybe these will help.
Bit hard to get the camera in some optimal positions
Rzeractor
shanec86
Administrator
Posts: 1454 Joined: Mon Jul 03, 2006 8:00 pm
Location: Melbourne
Contact:
Post
by shanec86 » Sun Aug 20, 2006 6:12 pm
yaa looks like a CA18 T25 to me
shanec86
Rzeractor
Posts: 39 Joined: Sun Aug 20, 2006 1:11 pm
Location: Cacapoopoopeepeeshire [Melb]
Post
by Rzeractor » Sun Aug 20, 2006 6:15 pm
Jesus. I thought my car was a just a bone stock ET aswell
Rzeractor
angel
Posts: 650 Joined: Wed Aug 02, 2006 11:28 pm
Location: Brisbane, west side
Post
by angel » Sun Aug 20, 2006 6:35 pm
5 bolt exhaust flange and 2 bolt inlet flange, 3 bolt outlet. id say t25
angel
exanator
Posts: 75 Joined: Fri Aug 04, 2006 4:51 pm
Location: sydney
Post
by exanator » Sun Aug 20, 2006 6:51 pm
ok well i believe its either a t25g off a sr20 or a t28!! whats the exhaust ar reading??? or the inducer cover reading???
exanator
Rzeractor
Posts: 39 Joined: Sun Aug 20, 2006 1:11 pm
Location: Cacapoopoopeepeeshire [Melb]
Post
by Rzeractor » Sun Aug 20, 2006 7:01 pm
exanator wrote: ok well i believe its either a t25g off a sr20 or a t28!! whats the exhaust ar reading??? or the inducer cover reading???
Dunno - can't really get the camera in an optimal view from sticking my head under the car rofl
Well I don't know if this is normal, but at 'max' boost the factory boost gauge in the dash seems to go waaaaaaay past 5...
Getting a proper gauge installed next week when I have some cash.
Rzeractor
Panda_ET
Posts: 3835 Joined: Wed Aug 02, 2006 10:02 pm
Location: Launceston
Contact:
Post
by Panda_ET » Sun Aug 20, 2006 7:01 pm
thanks for teh new pics that isa T25g(Sr20DET turbo ) u can just make out the .80 comp A/R
perfect turbo for it
should be good
Panda_ET
Rzeractor
Posts: 39 Joined: Sun Aug 20, 2006 1:11 pm
Location: Cacapoopoopeepeeshire [Melb]
Post
by Rzeractor » Sun Aug 20, 2006 7:10 pm
Here's what the now-known T25G is in
Thanks Panda and everyone else.
Rzeractor
angel
Posts: 650 Joined: Wed Aug 02, 2006 11:28 pm
Location: Brisbane, west side
Post
by angel » Sun Aug 20, 2006 7:15 pm
Panda_ET wrote: thanks for teh new pics that isa T25g(Sr20DET turbo ) u can just make out the .80 comp A/R
perfect turbo for it
should be good
you good eyes, yeh that i look at it, the compressor housing is too big to be t25. g it is.
wow and you thought you had a standard et, what a good buy.
angel
Rzeractor
Posts: 39 Joined: Sun Aug 20, 2006 1:11 pm
Location: Cacapoopoopeepeeshire [Melb]
Post
by Rzeractor » Sun Aug 20, 2006 7:16 pm
Picked it up for 2 grand, off of Ebay! with a RWC and 9 months rego.
Rzeractor
angel
Posts: 650 Joined: Wed Aug 02, 2006 11:28 pm
Location: Brisbane, west side
Post
by angel » Sun Aug 20, 2006 7:17 pm
Rzeractor wrote: Picked it up for 2 grand, off of Ebay! with a RWC and 9 months rego.
yeh, you gotta love Ebay.
angel