N12 Turbo Forums

... a stage 2 and 3 kind of thing. More an uneven sort of missing kind of idle. Sounds out of tune actually!!!! Also, despite lightening the stock flywheel, it free revs somewhat slower with the bigger flywheel and clutch assembly than it did with the little atmo setup. The new tough clutch is ...

its only bout $90 for a new ring gear.
when you get it done you can get the flywheel machined and balanced.

Dex

yeh my last et did it too, and now tommy's is starting to do t lol. how do i go about it? can i just buy a new ring gear and use the oxy to heat it up and put it on the flywheel or am i better off getting a whole nother flywheel?

... an extreme clutch, they have wasted soooooooo much of my time. can get exedy HD organic for 190, but sorta want somethin better. also i need a new flywheel with a GOOD ring gear, as mines fucked and grinds when i start lol. might get a exedy button for 380, but i reckon i can get cheaper if i hunt ...

... pix of the assembly. Next i lifted the engine and gearbox out today. The clutch is a hotted up but small 180mm NA item riding on a lightened NA flywheel with an NA box with a 3.7 diff. (3.5 stock ET) I have a lightened ET flywheel and a tough F1 Racing Components Stage 2 organic clutch kit I ...

... Year/ Model:83 exa Colour:morron Period of ownership:18 month Performance: 97.7@fw Engine Mods:Full rebuild,40th Nason pistons,lightened flywheel, lightened and linished crank, balanced bottom end to 8000rpm stock head extreme dubble plated ceramic heavy duty clutch, fmic 2 1/2" ...

... springs stock cam, bin the log,afm and dizzy,one mean street at 10psi i just got my 83 exa back on the road rebuilt donk 40th pistons lightened flywheel and bottom end to suit lt10 x4 n 4 coil pack stock head fmic shity manifold t25 stock head n intake with 10lb run in tune i got 97.7kw@fw plenty ...

Straight drop in but different clutch, flywheel and starter. If you want to use an ET box, youll need the ET fly, clutch and starter and vice versa. If your dropping the atmo transmission in along with the motor then the drive shafts will go ...

Awww hawhaw it can make a SHITLOAD of difference in some cases to the point where you cannot replace the clutch cover. Try it inside out on the flywheel and Im willing to bet the cushion drive assembly will sit on the flywheel bolts! I mean, "A" particular plate may sit inside out due ...

If the flywheel isn't smooth as glass, how long you figure before clutch useage makes it so? I call baloney, particularly since the clutch feels perfect. Maybe even a little grabby at first, if anything. Also, I'm not in the ...

Flywheel is not meant to be smooth as glass. That would suggest it's glazed and needs machining.Machin the flywheel. For the 40 or 50 bucks it I'll cost ya you'll regret it if you don't. In regards to which way the clutch ...

shanec86 wrote:

tassuperkart wrote: Anywhere.

just got back from KFC, but they looked at me funny when i asked them to machine the flywheel?

Yoo, eeeediotttt!

Hey, this seems a bit pointless since the flywheel's friction face is smooth as glass. Not the merest hint of any ridges or scoring... Unless someone can give me a good reason it needs doing anyway, I reckon I'll give it a miss. Here's a thing: ...

tassuperkart wrote: Anywhere.

just got back from KFC, but they looked at me funny when i asked them to machine the flywheel?

What sort of mobs do this work?

Anyone know a cheap joint to have it done in Melbs?

Don't need it lightened, just cleaned up for a new clutch.