N12 Turbo Forums

http://forum.n12turbo.com/viewtopic.php?t=679


saturnuksenkatu 5 riihimäki finland

connect those alarm wires to your hazard light switch wiring

I.E put your hazard blinkers on, release the switch from the dashboard and use your test light to find out which ones are "hot"

I work as a taxi driver

Aaidan wrote:I work at mcdonals darlington making burgers and cleaning the place lol

and spitting on yer onions

check your fuses

do a diagnostic check

check your wiring again

replace the ECU

helpful files (procedure for diagnostics check, ECU wiring schematics)

http://www.nbl.fi/~nbl2443/wanhat/9.6_07-430.jpg pic from last summer. Ahvenisto race track i know, i need stiffer shocks and springs. and i don't have anti-roll bar in the rear. P.S. damm that was fun, although we did have some technical issues first (a snapped oil pressure sender t-block,luckily ...

do you people know why god invented turbo lag?

to give v8 a chance

is the exhaust side divided on these, cause you could try to do somekind of flap system on it (used in drifting, to get better low rpm response)

Do them up till they strip and then back them off a 1/4 turn...................LMAO i call that torque "venäläinen momentti" the russian torque legend has it, that first Ladas(a Russian car) that were shipped here from USSR back in the seventies had their wheel nuts in that particular tor...

A quick collision estimate with WINFAST



[/img]

StrayBullet wrote:All BRC gearboxes show the same problem. Pops out at 5th gear.

don't run on fifth below 50mph (80km/h) or the oil won't make it to the fifht gear.

slide hammer is the way to go, but the hub has a tendancy to stuck, so you might have to unbolt the spindle-knuckle and get the hub pressed off it.

took some "new" photos last week My Optima Redtop http://www.nbl.fi/~nbl2443/projekti/AAAA0017.JPG More pics the battery cable is 70mm^2 (somewhere between OOO an OO AWG) welding cable, normally used to weld railway tracks together, so it should be sturdy enuff also did some editing on old...

the PA steering rack is a tiny bit faster (IIRC a half a turn or something likethat), plus you get power assisted steering.

PA steering rack from a N13 pulsar/sunny/whatever(with the E16 engine) should fit, aswell as pump and plumbing (with the E16 right side engine mount)

yeah cool but what i want to no is how they fit on ive got one the hight difference is a fair bit so it dont just bolt on any idears cheers leayr It does almost bolt on. the valve gear is similiar the only difference is those two rocker axle bolts(the ones that hold the rocker cover in place). get ...

i love australia!!!!! "sorry for my mistake's guy i speak english quite good i spend 10 years of my life to learn it in privat school" ever the applepolisher. OT about english teaching in Finland. since the seventies almost all people have been taught english from elementary school to gol...