N12 Turbo Forums

Dyno tonight was extremely successful. I didn't expect it to ... 4pm and got it all going. It was bucking and kicking missing on the dyno - it was REALLY bad and it definantly ... The final result was 120kw at the wheels 11PSI of boost on the standard wastegate which spiked a bit on initial ...

just a standard fuel pump and injectors... should probably change them one day haha.

i gotta re-upload the pics too, looks like they've all gone missing

... today, fixed the windows so they stay in the rails now =D fixed the front door handle, was hard to open the door from the outside. found out that ... full exhaust, no cat. still need a front break caliper bolt as ones missing. also when i go over a bump theirs a bang from the rear left under ...

It's not a throttle position sensor, it's an idle switch. Be surprised if it makes that much difference. you are ... So if it isn't "off" when you set your base timing, the engine will be missing out on 6deg or so of timing when driving, which will make the engine feel sluggish. ...

Jobs done. main things werre to fabricate turbo water lines and ... .64 back housing on the turbo. I dont run a lot of boost on this thing so freeing up the hot gasflow seemed ... plenum. When I got my EGI plenum, the PCV valve was missing so I dodged up a setup using the stock ET valve. ...

forget what i just asked.

Problem found.

Rear mount not even bolted to the engine.

The bolt and nut is missing all together..GEEE wizzz.

The mount on engine side has an elongated hole.

Do i just do it up how the shock thingo lines up or is it meant to move a bit?

I just bolt turbos on so i have no idea here. Are a t25 .48 and T25g .8 front housings simply interchangeable ... snouts. I have adapters for both. Is it this easy and straightforward or am I missing something? Cheers E

... to a big thing in the end. Its the result of lots of changes and addiditons over time and never really getting everything done quite right in an ... somewhere between a stage 2 and 3 kind of thing. More an uneven sort of missing kind of idle. Sounds out of tune actually!!!! Also, despite lightening ...

factory light blue 86+ model ET with factory wheels and missing front lip at the Bright side of the Myrtleford main street VIC about 2 weeks ago and again parked ...

josh strong wrote:...once hot it won't start at all any ideas ....

this normally points to a faulty CAS (rpm-sensor) but not the other problems. (maybe you're having 2 issues?)
greets
martin

Ok, so The oil was milky and started missing so I ripped the head off. Motors fucked. 2 bent valves, suspected cracked head, and a burnt piston. New motor time

May be missing due to rooted plugs or leads, possibly even coil

Will put that in but why won't it idel and wen running missing and shit

Hey guys I.haven't been on here in a long time ..but I have a question I put my new motor in wirred it all up fine but it won't idel and wen its running missing really bad once hot it won't start at all any ideas ?? Would b great thanks .

Valentich wrote:Great work as usual, but I'm missing the RAT LOL

Anyway, nice concept, are you going to paint on the rivets or you looking at something else "trick" for that.

not half as much as i do mate....

yeah i will be airbrushing the rivits and sheet metal joins.