N12 Turbo Forums

Took the car 4 drive it is missing around 5000rpm on 10 psi have intercooler & vl throttle body any ideas wot it could be

... days, and met up with a couple of mates off PGA that i had sold parts to from my old N13. only drama was when two bellhousing bolts decided to go missing, replaced one and couldn't find one the right length for the other but it went a long way to fixing my shifting problem lol http://imageshack.us/a/img41/6991/20121226162817.jpg ...

Have not had any time to really work on it.... But I did rip the head off... and found..... Not a hole in the piston.... but a broken valve. Nice little piece from it missing. The bore looks OK. I will post some photos when I get time... But I have 2 questions... ...

Sorry to bump oldies but new on here & thought I'd share my experience. The last configuration of one of my exas before it came off the road about 6 years ago was: E16 about 2Kg missing off the back of my flywheel ET Gearbox & driveshafts with 15" 205/50 on ...

I wouldn't have thought this was from rings unless they are missing entirely. I'd be inclined to pull the Rocker cover off and make sure there is a full range of motion on the valves, and that the rockers are set to the correct specs. Every time I've had ...

... for the flexible rubber lines. Standard fitment to just about every car ever made. If its hardlines that have been cut, just re-flare and add the missing sections with a union. Rubber lines can be made at any brakle shop. l8r E

ok took the head of the exa yesterday to find a wet head gasket warped/cracked head so now its time to replace it with my fresh reco head i got back last week only thing im missing is some gaskets to put it back together

Hey guys, I was just on the freeway driving to sunbury.. On the way ther I noticed something with the car. ... 120, it struggles to reach it and past it.. During the attempt it feels like its missing or just bogs.. Nothing happens I just sit ther.. All this noise but nothing is ...

... because of the valves not sealing or it can be the piston rings in the bore!..Either way you may have an issue, can even be a timing issue..If its missing it could be a bad injector or bad wiring to the injector plug..faulty lead, faulty plug.Could be a number of things!..Do some trial & error ...

... when I start the car, It seems like its missing... when I remove the plug to the injector.... ... so I changed injectors.... no change... secondly, when Iv been testing it on road, its seems to be ok, until you put the foot in and the boost rises, coughs and misses but still pulls all ...

... indicators, fuel pump etc. However NOTHING works. Either its the Ignition barrel, but then i shouldnt even get voltage to the contacts? Or im just missing something really obvious

Hey guys, I have a project Et that I have put back to original condition and I having intermittent issues, the engine misses at low 2500 rpm,changed AFM dizzy,ecu, cleaned all plugs to ecu & AFM, wiggled the ecu wires while driving, and moved tps sensor and idle fuel mixture, now low rpm is fine...

... sorting out which would be my advice. Ill almost bet youll find those missing injector driver leads tucked up inside the loom somewhere as well. ... the thing laid out, it becomes much clearer as to what needs to be done. Just compare the colours in the loom with the colours on the diagramme. ...

ok i have been trying to pay close attention to what the car is doing when it farts about. ... have to be much, it sounds alot like i am missing a plug or injector. however because the car ... coil. Also the turbo spools. It doesnt hit full boost or anything as i am only around 2200-2500 RPM, ...

... your looking at the correct drawing. You have to match up the colurs on the diagramme with the pinouts on the top (separate) V2 drawing. The main ... for you to ponder. You have 2 injector drivers connected and 2 missing. Im guessing that someone has connected 2 injectors together on each ...