N12 Turbo Forums

Why would you think that 9Ms dwell time at 8psi is maxed out?
Unless you are turning that thing at 15,000 rpm then you have something going on very wrong there.

Oracle

No need to shout. all CAPS is a nasty read.

stock injectors are 247 cc/min @ 3 bar. bosch number 0280150152 aka Nissan 1660317M00

stock bottom can take around 350 BHP at wheels.

HEY THERE PEEPS... WOULD JUST LIKE TO KNOW WHAT THE STANDARD INJECTOR CC IS.... SOME SAY ITS 150CC SOME SAY ITS 200CC AND I LOOKED IN THE ... TO PUT HUGE INJECTORS IN .... I JUST WANT TO STEP UP TO THE NEXT LEVEL IN SIZE MAYBE UP BY ABOUT 40-60CC INCREASE FROM STANDARD SIZE BUT I NEED TO FIND ...

A few more things. I finally got around to moving the injector power supply to a new location behind the passengers side kick panel. ... any issues with the booster being too small for such large MC piston size compared to stock. I reckon Ill have the brakes of the century if it all ...

OK Its no use clutching at straws by swapping out injectors and such random acts which have no bearing on anything. This issue MUST ... the chassis. On the other side of the engine, there should be another decent size black lead bolted to the chassis rail and connects to the back of the head. ...

... bracket on the plenum was always a little dodgey so i reworked that. Injector plugs all had to be changed. I had no end of touble with these due ... The hose setup is made out of generic hose elbows and not the correct size. The waterpump leak has calmed down to just an occasional drip so I ...

... my time... I think i'll have a crack at pulling the fuel rail off, injectors out and replace all the o-rings myself... haven't done it before, ... you can pick up, or do they have to be ordered? And is there a standard size or does it all depend on the style/brand of injector. Thanks for the ...

... and the Version 2 sequential ECU's have different wiring to the injectors. Its a very easy mistake to make and messes with the injector phasing. ... the loom into that plastic tube stuff, cable tyeing all the changes in size and the wiring exits and loading the engine up. next job was to mount ...

... to clean up any dips or spikes in the AFR's Remember to go easy on the size of the injector dwell times when making adjustments. Make a few chances and note how the readings ...

more here

http://www.witchhunter.com/injectordata1.php4
http://forum.pulsar.org.au/showthread.p ... lour-Chart

Hi guys, It would be much appreciated if those of you out there who can tell me what size injectors your all running what your duty cycles on idle are and your idle RPM. Its related to a uni project im doing on my N12 :D and it would be a big help. Even better if ...

Hahaha of coarse it will work, if your using like a 50cc injector. A small aftermarket computer to run a 5th injector would be fine, like ... just turning an injector ON at 15+ psi. Now i havent seen you mention what size injector you will be using, but if its a standard one, you will be flowing ...

... stupid and funky cocktails?? Pfft. Stand up and be a man! Just up your injector size (flow rate) by 2.4 times and just pour in straight metho. No changes to basic tuning either. ...

... stupid and funky cocktails?? Pfft. Stand up and be a man! Just up your injector size (flow rate) by 2.4 times and just pour in straight metho. No changes to basic tuning either. ...

... stupid and funky cocktails?? Pfft. Stand up and be a man! Just up your injector size (flow rate) by 2.4 times and just pour in straight metho. No changes to basic tuning either. ...