N12 Turbo Forums

Hey mate does this help you? vac line from manifold goes to boost gauge sensor. Vac line from next to fuel rail goes to throttle body

... (400ish) or bosch 015's/024's/036's@440cc will go into the standard rail and be able to flow the juice you will need. You will probably need a new fuel pump, or inline helper pump to keep the pressure upto the injectors at that boost. For ...

... turbo? If so what would be the perfect sized injectors for my standard fuel rail? I live in victoria and there is an opportunity For me to get my standard ECU tune on ...

... is connected up correctly. Bottom barb returns to tank and side barb to fuel rail. Vacuum line leads to junction that the brake booster feeds vacuum from. TPS set, Idle ...

... 1/2" rear muffler & tailpipe. Took a bit of tuning but with 98 fuel, if you took off slowly, then once your moving (clutch fully out) punch ... over 4000, but would accelerate from 900rpms in 5th gear like a common rail diesel. This setup was gold for a runabout & in traffic. Used ...

... http://i8.aijaa.com/b/00259/11157752.jpg Painted fuel rail http://i7.aijaa.com/b/00917/11157753.jpg How much is stock capacity of injectors? cm3/min... ...

... of things. Planning to strip it once i finish my exams, need to use the fuel rail, fuel tank and injectors, the rest of the stuff is all spares... og and the seats too! ...

... main parts im concerned about to put from the exa in my et. Fuel rail, fuel tank, injectors. Also putting the seats in! but i know that works! :) Just thought ...

Eh??? Wheres ur imagination???

What about 4 x 8mm brass tees and 16 T-bolt clamps and some EFI hose = instant fuel rail.... not pretty but works perfectly....!

Oracle

Hey guys, just wondering if a fuel rail of a CA or SR20 can fits or can be modified to fit an ET? I dont have a fuel rail at the moment. Would consider making my own one but dont really have access to the right tools.

Cheers.

... the injector bank injectors to plumb into the inlet runners to deliver fuel, a fitting has to be tapped into the inlet to attach the hoses. it becomes ... side fed injectors much like the the sr20 injectors it has its own fuel rail, pressure regulator and fuel return, inside the gas tank is fitted ...

... system after 3 inch dump pipe Microtech MT4 Computer Custom billet fuel rail with speedflow fittings 550cc injectors Walbro fuel pump Turbosmart fuel pressure regulator ...

... come up. Off the top of my head: I have seen a split top casing in the fuel pressure reg, that seemed to exhibit the problems you are having but ... only AFTER you replace the filter with a new one. Measure it at the rail, therfore you are consequently checking that regulator. If you complete ...

... 270cc O-ring type, Useable with a stock ECU as you can clamp 10mm fuel hose to the o-ring spigots at a pinch but youd have to remove the stock ... end and then rely on crushing the 10mm down to fit on the 8mm fuel rail with hose clamps......FAIL! In lieu of a "proper" extruded ...

... yeah stuff getsme from time to time. Not sure where I'll fit this fuel rail probably mounted to the plenum I can't sleep so am up on eBay and found relay packs, clip ...