N12Turbo.com lanyards are now available! Click here to visit the shop

Search found 850 matches: coil

Searched query: coil

by jarlenfos
Wed Jul 10, 2019 9:18 am
Forum: General Tech & Modifications
Topic: Problems with my stock 1985 N12 Pulsar + potential turbo?
Replies: 14
Views: 14307

Problems with my stock 1985 N12 Pulsar + potential turbo?

Okay, tried that last night, wire straight from battery to positive on coil but same result. I took the ignition module out of the distributor to try and test. Should there be resistance between the 2 terminals? I have no resistance anywhere on the module when testing.
by boosted
Tue Jul 09, 2019 5:17 am
Forum: General Tech & Modifications
Topic: Problems with my stock 1985 N12 Pulsar + potential turbo?
Replies: 14
Views: 14307

Problems with my stock 1985 N12 Pulsar + potential turbo?

... before) I can send you a schematic for the EUR-spec N12, but it is fairly simple: 12V positive goes from the ignition switch to the igntition coil and to the dizzy module. One cable goes from the dizzy module to the ign. coil to switch it on/off like the breaker would do. If all positive and ...
by Wout-P11
Wed Nov 07, 2018 7:27 am
Forum: Members Rides & Introductions
Topic: Wout from the Netherlands
Replies: 9
Views: 5990

Wout from the Netherlands

... looking engine build! Thanks! :D Have some ignition problems to sort, because it won't spark. It's an E16S B12 distributor but the car has a B11 coil. Also have some pictures from the gearbox overhaul... https://farm5.staticflickr.com/4778/26924502008_78547a7274_c.jpg [url=https://flic.kr/p/26pntPL] ...
by KiloooNL
Mon Jul 24, 2017 7:32 pm
Forum: Members Rides & Introductions
Topic: Ben's N12 ET Turbo [Updated Pics 2018]
Replies: 26
Views: 25317

Ben's N12 ET Turbo

... far I have ordered a few things for the MT-8 install as follows: AEM X-Series Wideband o2 sensor CA18DET Injectors (Cleaned & flow tested) LS1 coil packs Walbro 255 fuel pump Once these have arrived I can start working out a plan and get the MT-8 installed! Woohoo!
by tassuperkart
Sun Jun 04, 2017 1:03 pm
Forum: Completed Articles
Topic: Coil Dwell Calibration and Ignition Basics
Replies: 0
Views: 8257

Coil Dwell Calibration and Ignition Basics

Here is a link to an excellent artical on ignition coil dwell calibration. Now, unless your using something a little better than an old Microtech, then a lot of the info isnt dirfectly applicable. However, there is a hell of a lot of excellent ignition ...
by tassuperkart
Wed Jan 25, 2017 12:04 pm
Forum: General Tech & Modifications
Topic: Sticking Choke??
Replies: 2
Views: 3529

Re: Sticking Choke??

... First and foremost, this needs to be sorted out. id be guessing the choke is actually not getting power here and there and is staying on. Changing coils and stuff isnt going to solve anything without fIrst sorting the electrical issue. Things to look for first are the couple of fuseable links which ...
by Reswob2
Fri Jan 06, 2017 7:46 pm
Forum: General Tech & Modifications
Topic: Sticking Choke??
Replies: 2
Views: 3529

Sticking Choke??

... get all jerky as a prelude to stalling. We replaced the leads and when my husband, Ryan, removed the high tension lead that connects the ignition coil to the dizzy cap, the dizzy cap decided to crumble on him at the connection point between the lead and the cap. There looked like there was white ...
by robbo
Wed Jul 23, 2014 1:19 pm
Forum: Members Rides & Introductions
Topic: 1983 exa turbo - bayside blue and 81POLR!!!!
Replies: 67
Views: 50982

... also had 10mm topgun ignition leads available for $75 so i'll get a set custom made in a couple of weeks to go with the MSD blaster 3 ignition coil to ensure there is an overkill of spark rear of the car is jacked up and halfway through removing the rear trailing arms to rebush them not long ...
by TurboZ.Dude
Sat May 24, 2014 12:05 am
Forum: General Tech & Modifications
Topic: E13S vs E15 heads
Replies: 7
Views: 11751

... when I try to accelerate. I've cleaned up and actually replaced the carburetor, replaced spark plugs, distributor cap and rotor, ignition coil, nothing seems to make a difference. The engine will also start on three cylinders rather often but after a minute or so it stabilizes and runs ...
by do0zy
Fri May 23, 2014 8:02 pm
Forum: General Tech & Modifications
Topic: No Spark :(
Replies: 10
Views: 10829

Awesome tas,
I tested the coil correctly and it was displaying between and 11 and 12 volts.
The circuit breakers were relays...

I gave my other distributor a good clean, installed it and the car started :)

Thanks everyone for all your help :)
by do0zy
Fri May 23, 2014 9:37 am
Forum: General Tech & Modifications
Topic: No Spark :(
Replies: 10
Views: 10829

Thanks for the help fellas. A couple of questions, -If the CAS had failed, wouldn't the coil still be showing a voltage reading? -Above the fuse box there are some circuit breakers. Are they reset a certain way? or, let's say there is a shorting somewhere, would the ...
by do0zy
Thu May 22, 2014 5:48 pm
Forum: General Tech & Modifications
Topic: No Spark :(
Replies: 10
Views: 10829

... it was running. Very strange... I haven't got a spare battery to try, but it is reading between 12 and 13 volts on the volt meter. I tested the coil: the primary resistance was at 2.0 the specifications are 0.84 - 1.02, could I higher primary resistance cause this issue? the secondary resistance ...
by do0zy
Thu May 22, 2014 7:48 am
Forum: General Tech & Modifications
Topic: No Spark :(
Replies: 10
Views: 10829

... the car - I tested all spark plugs. I worked backwards from there... I can hear the fuel pump priming, all other electrics seem fine. Should the coil have a voltage reading from the +ve and -ve terminals?
by do0zy
Wed May 21, 2014 3:27 pm
Forum: General Tech & Modifications
Topic: No Spark :(
Replies: 10
Views: 10829

No Spark :(

... I've checked the following: -Spark plugs - no spark -Distributor cap - cleaned contacts -Checked all leads and connections to dizzy -Swapped coil I have checked to see if the coil is getting an power by using a voltmeter on the +ve and -ve terminals on the coil, nothing is being picked up. ...
by tassuperkart
Thu Mar 13, 2014 7:18 am
Forum: General Tech & Modifications
Topic: NA help
Replies: 4
Views: 7194

... Engine loom extracted from an ET loom AFM Inlet manifold AND inlet runners/injectors, log etc Fule pressure regulator EFI Distributer Electronic coil and coil trigger (igniter/amplifier/transistor) whatever you like to call it Either, EFI distributor housing, or ability to modify NA to accept ...